Normy

Obsah

ČSN EN 16990 This document applies to Side by Side vehicles propelled by internal combustion engines using liquid fuels (petrol, diesel, bio-fuels, lpg) and/or electric drive, intended to be used primarily on unpaved surfaces and not intended to be used on public roads1). This document defines safety requirements relating to the elements of design, operation, and maintenance of Side by Side vehicles and deals with all significant hazards, hazardous situations and events relevant to Side by Side vehicles, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex M). It deals with the significant hazards during the whole lifecycle of the product as defined in 5.3 of EN ISO 12100:2010, This document is not dealing with: - Side by Side Vehicles exclusively intended for competition2); - Side by Side Vehicles fitted with side facing seats - Side by Side Vehicles intended to be operated by persons under the age of 14 years; - agricultural and forestry tractors coming under Regulation (EU)167/2013; - 3 or 4 wheeled vehicles coming under Regulation (EU)168/2013; - accessories for additional functions3); - the additional hazards due to the use of the Side by Side Vehicle on public roads; - the additional hazards due to the use of remote control. This document is not intended to cover all terrain vehicles (ATVs - Quads) as defined by EN 15997:2011. This document is not applicable to Side by Side vehicles which are manufactured before the date of its publication as EN.

Obsah

ČSN IEC 60840 This document specifies test methods and requirements for power cable systems, cables alone and accessories alone, for fixed installations and for rated voltages above 30 kV (Um = 36 kV) up to and including 150 kV (Um = 170 kV). The requirements apply to single-core cables and to individually screened three-core cables and to their accessories for usual conditions of installation and operation, but not to special cables, such as submarine cables and their accessories, for which modifications to the standard tests or the setup of special test conditions can be necessary. This document does not cover transition joints between cables with extruded insulation and paper insulated cables.

Obsah

ČSN EN 17206 This document applies to machinery, machinery installations and machinery control systems used in places of assembly and in staging and production facilities for events and theatrical productions (stage machinery, for short). Such facilities include: theatres, multi-purpose halls, exhibition halls; film, television and radio studios; concert halls, schools, bars, discotheques, open-air stages and other rooms for shows and events. The document applies to machinery installations with guided or unguided loads. This document covers machinery used in the entertainment industry including machinery that is excluded from the Machinery Directive (2006/42/EC) specifically Article 1, 2(j) which excludes "machinery intended to move performers during artistic performances". This machinery includes controls, electrical and electronic control systems, electrical and electronic equipment, hydraulic and pneumatic power supplies. The principles in this document also apply to machinery installations based on new technologies or specially designed installations which are not expressly mentioned here but which nevertheless operate in a similar manner or are meant for similar purposes to the equipment listed above.

Obsah

ČSN EN 1009-1 This document applies to machines for mechanical processing of minerals (cement, lime and gypsum, sand and gravel, industrial minerals, metalliferous ore and hard and soft rock aggregates, coal) and -products (slag and ashes, production and demolition waste) in construction and industry. It deals with the following types of individual machines for the mechanical processing of minerals and similar solid materials: - feeding machinery in accordance with EN 1009-2; - crushing machinery in accordance with EN 1009-3; - milling machinery in accordance with EN 1009-3; - screening machinery in accordance with EN 1009-4; - machinery for cleaning, water recycling, sorting (other than screens) and mud treatment in accordance with EN 1009-5; - mobile machinery in accordance with prEN 1009-6. This document gives the common safety requirements for mechanical processing machines used for quarrying, recycling and processing mineral and by-products (cement, lime and gypsum, sand and gravel, industrial minerals, metalliferous ore, production and demolition waste, slag handling, hard and soft rock aggregates, coal) in construction and surface mining and is intended to be used in conjunction with one of the parts EN 1009-2 to prEN 1009-6. These machine specific parts (EN 1009-2 to prEN 1009-6) do not repeat the requirements from this document, but add or replace the requirements for the machine type in question. NOTE 1 - The requirements specified in this part of EN 1009 are common to two or more types of machines for the mechanical processing of minerals and similar solid materials. Specific requirements in EN 1009-2 to prEN 1009-6 take precedence over the respective requirements of this document. This document also covers assemblies of two or more of the mentioned machines which function as an integrated whole. The machines included in the scope of this document can be fixed, semi-mobile or mobile. NOTE 2 - prEN 1009-6 "Specific requirements for mobile and semi mobile equipment" is under preparation to cover specific requirements (e.g. mobility, braking, access, frequent transportation), including exceptions and additional requirements for mobile and semi mobile equipment. This means that mobile machines are not covered as long as EN 1009-6 is not published by CEN. This document covers transportation, erection, commissioning, use and maintenance of single machines or combination of single machines. This document deals with significant hazards, common to the types of machines listed in this scope when they are used as intended and under conditions for misuse which are reasonably foreseeable by the manufacturer (see Annex F) and to the hazards due to the combination of these machines and specifies the appropriate measures to eliminate or reduce the risks arising from the significant hazards. Design relating to road traffic regulations is not covered by this document. This document does not cover: - design relating to road traffic regulations; - hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility; - specific hazards related to mobile machinery. NOTE 3 - EN ISO 13766-1 and EN ISO 13766-2 specify test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kinds of mobile construction machinery. This document is not applicable to machinery which are manufactured before the date of publication of this document by CEN.

Obsah

ČSN EN IEC 60565-1 This part of IEC 60565 specifies methods and procedures for free-field calibration of hydrophones, as well as individual electroacoustic transducers that can be used as hydrophones (receivers) and/or projectors (source transducers). Two general types of calibration are covered within this document: absolute calibration using the method of three-transducer spherical-wave reciprocity, and relative calibration by comparison with a reference device which has already been the subject of an absolute calibration.síly.

Obsah

ČSN 34 7010-82 ed. 2 Tento harmonizační dokument porovnává a specifikuje zkušební metody, které se mají použít pro zkoušení elektrických kabelů s polymerovou izolací a pláštěm pro jmenovité napětí do 20,8/36 kV včetně, určených pro distribuční sítě a pro použití v elektrárnách a rozvodnách. Zkušební metody v této normě jsou doplňující k metodám již harmonizovaným, např. EN 60332-1 soubor a EN 60811 soubor, a jsou použity pro zkoušení typů kabelů specifikovaných v HD 603, HD 604, HD 620, HD 622, HD 626 a HD 627. V každém případě tyto HD poskytují doplňující informace potřebné pro praktické použití pro každý konkrétní typ. Proto současná norma jako taková není dostatečná pro provádění a vyhodnocení zkoušek na elektrických kabelech.

Obsah

ČSN EN ISO 14907-1 This document specifies the test procedures of electronic fee collection (EFC) roadside equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically. The scope of this document is restricted to systems operating within the radio emission, electromagnetic compatibility (EMC) regulations, traffic, and other regulations of the countries in which they are operated. This document identifies a set of suitable parameters and provides test procedures to enable the proof of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to the defined requirements of an application. The defined parameter and tests are assigned to the following groups of parameters: - functionality; - quality; - referenced pre-tests. An overview of the tests and parameters provided by this document is given in 5.1 and 5.2. This document describes procedures, methods and tools, and a test plan which shows the relation between all tests and the sequence of these tests. It lists all tests that are required to measure the performance of EFC equipment. It describes which EFC equipment is covered by the test procedures; the values of the parameters to be tested are not included. It also describes how the tests are to be performed and which tools and prerequisites are necessary before this series of tests can be undertaken. It is assumed that the security of the system is inherent in the communications and EFC functionality tests, therefore they are not addressed here. All tests in this document provide instructions to evaluate the test results. This document defines only the tests and test procedures, not the benchmark figures that these are to be measured against. The test procedures defined in this document can be used as input, e.g. by scheme owners, for prototype testing, type approvals, tests of installations and periodic inspections. Related to a conceptual model of an EFC system, this document relates only to the equipment of the user and the service provider. Any other entities are outside the scope of document. EFC systems for dedicated short-range communication (DSRC) consist, in principle, of a group of technical components, which in combination fulfil the functions required for the collection of fees by electronic automatic means. These components comprise all, or most, of the following: - OBE within a vehicle; - OBE containing the communications and computing sub-functions; - optional integrated circuit card which may carry electronic money, service rights, and other secured information; - communication between OBE and RSE based on DSRC; - equipment for the fee collection at the RSE containing the communications and computing sub-functions; - equipment for the enforcement at the roadside; - central equipment for the administration and operation of the system. The scope of this document relates solely to OBE and RSE and the DSRC interface between OBE and RSE including its functions to perform the fee collection. All the equipment used for enforcement (e.g. detection, classification, localization, and registration) and central equipment are outside the scope of this document.

Obsah

ČSN EN IEC 62056-8-8 This part of IEC 62056 describes how the DLMS/COSEM Application layer and the COSEM object model as specified in IEC 62056-5-3:2017, IEC 62056-6-1:2017 and IEC 62056-6-2:2017 can be used over the lower layers specified in the IEC 14908 series, forming a DLMS/COSEM ISO/IEC 14908 communication profile. This document is part of the IEC 62056 series. Its structure follows IEC 62056-1-0 and IEC TS 62056-1-1. Annex A (informative) provides examples of representative instances of data exchange. NOTE - This Annex A is included and referenced for consistency with other parts of the IEC 62056 suite, but it is empty. Annex B (normative) defines COSEM interface classes and related OBIS codes for setting up and managing the DLMS/COSEM communication profile for IEC 14908 networks. These interface classes and OBIS codes will be moved later to IEC 62056-6-2 and IEC 62056-6-1. Annex C (informative) provides an implementation guide and specifies a migration path from Utility Tables based applications to DLMS/COSEM based applications. Annex D (informative) specifies the OSGP-AES-128-PSK security suite for optional use on the adaptation layer level. Annex E (normative) specifies the repeating mechanism over the ISO 14908-3 Power Line Channel network. Annex F (informative) specifies ISO/IEC 14908-3 Registration and monitoring of LNAPs.

Obsah

ČSN EN 12670 Tato norma definuje doporučenou terminologii pokrývající vědecké a technické termíny, zkušební metody, výrobky a klasifikaci přírodních kamenů. Tento dokument nezahrnuje pokrývačskou břidlici, viz EN 12326-1 a EN 13236-2.

Obsah

ČSN EN 13850 Tato norma stanovuje metody pro měření přepravní doby mezi koncovými body vnitrostátních a přeshraničních jednotlivých prioritních zásilek (SPPM) sbíraných, zpracovávaných a dodávaných operátory poštovních služeb. Bere v úvahu metody používající reprezentativní vzorky mezi koncovými body všech typů služeb jednotlivých prioritních zásilek pro adresné zásilky se stanovenými úrovněmi služby přepravní doby, nabízenými zákazníkovi. Tato norma se týká měření služeb SPPM, poskytovaných zákazníkům z domácností a podniků, kteří podávají zásilky do poštovních schránek, u přepážky na poštách, nebo mají sběrná místa ve svých kancelářích. Pro pokrytí toků s menšími objemy zásilek obsahuje tato norma oblasti pružnosti pro přizpůsobenou implementaci. Norma obsahuje specifikace pro řízení kvality a auditování systému měření.

Obsah

ČSN ETSI EN 303 648 V1.1.2 Předmětem tohoto dokumentu je definovat architekturu související s rádiovou rekonfigurací pro rekonfigurovatelná rádiová zařízení vyjma rekonfigurovatelných mobilních zařízení, která jsou zahrnuta v ETSI EN 303 095 [i.4], ETSI EN 302 969 [i.9] až ETSI EN 303 146-4 [i.13]. Tato práce je založena na systémových požadavcích definovaných v ETSI EN 303 641 [1] a na případech použití definovaných v ETSI TR 103 062 [i.1], ETSI TR 102 944 [i.2], ETSI TR 103 585 [i.3].

Obsah

ČSN ETSI EN 300 113 V3.1.1 The present document covers the technical requirements for radio transmitters and receivers used in stations in the Private Mobile Radio (PMR) service. It applies to use in the land mobile service, operating on radio frequencies between 30 MHz and 1 GHz, with channel separations of 12,5 kHz, 20 kHz and 25 kHz, intended for speech and/or data. It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech. The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and associated demodulator and decoder. The types of equipment covered by the present document are as follows: 1) base station (equipment fitted with an antenna connector, intended for use in a fixed location); 2) mobile station (equipment fitted with an antenna connector, normally used in a vehicle or as a transportable); and 3) those handportable stations: a) fitted with an antenna connector; or b) without an external antenna connector , but fitted with a permanent internal or a temporary internal 50 Ohm Radio Frequency (RF) connector which allows access to the transmitter output and the receiver input. Handportable equipment without an external or internal RF connector and without the possibility of having a temporary internal 50 Ohm RF connector is not covered by the present document.