Normy

Obsah

ČSN EN ISO 9038 This document specifies a procedure, at temperatures up to 100 °C, to determine whether a liquid product, that would be classified as "flammable" by virtue of its flash point, sustains combustion at the temperature(s) specified, for example, in regulations. NOTE - Many national and international regulations classify liquids as presenting a flammable hazard based on their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot "sustain combustion" at some specified temperature(s). The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, that have a flash point. It is not applicable to painted surfaces in respect of assessing their potential fire hazards. This test method is applicable, in addition to test methods for flash point, for assessing the fire hazard of a product.

Obsah

ČSN EN 12122 This document is applicable to ammonia solution used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonia solution and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also provides basic information relating to safe handling and use of ammonia solution (see Annex B).

Obsah

ČSN EN ISO 23649 This document specifies a method for determining the total content of the following cyclosiloxanes in chemicals for the leather tanning industry: - octamethylcyclotetrasiloxane (D4); - decamethylcyclopentasiloxane (D5); - dodecamethylcyclohexasiloxane (D6); This method requires the use of gas chromatography (GC) equipped with a single quadrupole mass spectrometer (MS) to identify and quantify the cyclosiloxanes.

Obsah

ČSN EN ISO 16187 This document specifies quantitative test methods to evaluate the antibacterial activity of footwear and footwear components. This document is applicable to all types of footwear and footwear components employing non-diffusing antibacterial treatments.

Obsah

ČSN EN ISO 16179 This document specifies a test method for the qualification and quantification of organotin compounds by applying gas chromatography coupled with mass spectrometry. This test method is applicable to all types of footwear materials except metal hardware (see ISO/TR 16178).

Obsah

ČSN EN ISO 15883-3 This document specifies requirements for washer-disinfectors (WD) that are intended to be used for emptying, flushing, washing and thermal disinfection of non-critical devices in the form of human waste containers by one operating cycle. This document is intended to be used in conjunction with the general requirements specified in ISO 15883-1:2024, except for those specified in 4.1.1, and with the requirements of ISO 15883-5:2021, except for those specified in 4.1.2.

Obsah

ČSN EN 12521 Tento dokument stanovuje minimální požadavky na bezpečnost, pevnost a trvanlivost všech typů bytových stolů pro používání dospělými osobami, včetně těch, jejichž konstrukce obsahuje sklo. Obsahuje také další zkušební metody v příloze A a v příloze B. Dokument se nevztahuje na stoly na kozách. S výjimkou zkoušení stability document neposkytuje hodnocení žádných prvků bytových stolů sloužících ke skladování.

Obsah

ČSN EN 16072 Cílem zavedení celoevropského systému tísňového volání z vozidel (eCall) je automatizovat hlášení dopravních nehod kdekoli v Evropě za použití stejných technických norem a stejných cílů kvality služeb prostřednictvím "veřejných pozemních mobilních sítí" (PLMN), které podporují předem přidělenou evropskou adresu tísňového volání (viz citované dokumenty), a poskytnout prostředky pro ruční spuštění hlášení o nehodě. Tento dokument specifikuje obecné provozní požadavky a vnitřní postupy pro služby tísňového volání z vozidel (eCall) za účelem přenosu tísňové zprávy z vozidla do tísňového centra (PSAP) v případě nehody nebo nouze prostřednictvím komunikační relace eCall a pro navázání hlasového kanálu mezi zařízením ve vozidle a PSAP. Soukromé služby podpory tísňového volání ve vozidlech poskytované třetími stranami mohou poskytovat podobnou funkci eCall jinými prostředky. Poskytování těchto služeb je definováno v normě EN 16102 a není předmětem tohoto dokumentu. Komunikační protokoly a metody pro přenos MSD nejsou v tomto dokumentu stanoveny. Tento dokument specifikuje provozní požadavky na službu eCall. Důležitou součástí služby eCall je minimální soubor dat (MSD). Provozní požadavky na MSD jsou stanoveny v tomto dokumentu, ale forma a obsah dat MSD zde nejsou definovány. Společný evropský MSD je stanoven v EN 15722. Tento dokument nespecifikuje, zda je služba eCall poskytována pomocí vestavěného zařízení nebo jinými prostředky (například v případě dodatečně instalovaného zařízení).

Obsah

ČSN EN ISO 12385-5+A1 This document specifies the particular materials, manufacturing and testing requirements for stranded ropes for suspension, compensating and governor duties for traction drive and hydraulic lifts moving between guides and similar applications. The particular hazards covered by this Part are identified in Clause 4. This document does not establish requirements for information for use other than those given in Clause 7 of Part 1. Neither does it cover the requirements for ropes fitted with terminations. Minimum breaking force values for the more common classes, sizes and grades of rope are provided in Tables 6 to 10.

Obsah

ČSN EN 12900 This document specifies the rating conditions, tolerances and the method of presenting performance data of refrigerant compressors to enable comparison of different compressors. This document is applicable to single-stage compressor and two-stage compressor data with or without an additional intermediate pressure inlet. The performance data of compressors used with R-744 in transcritical operation are covered in this document. The data relating to the refrigerating capacity, heating capacity and power absorbed include requirements for part-load operation where applicable.

Obsah

ČSN EN 1459-5+A1 terrain non-slewing and slewing variable reach trucks (hereafter referred to as "trucks") dealt with in EN 1459-1:2025, EN 1459-2:2015+A1:2018 and EN 1459-4:2020+A1:2025. This document covers the interface for the attachments fitted to the telescopic boom carriage or mounted on the forks when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document does not cover: - interface for interchangeable equipment designed for lifting person(s) (covered by EN 1459-3:2015); - interface for equipment for container handling (e.g. spreader); - interface for equipment permanently installed on the machine and not intended to be removed by the user. NOTE - In this case, equipment becomes part of the truck. This document does not give requirements for the completed assembly of a truck fitted with an attachment. This document does not address risks to parts of the truck other than the interface with the attachment. This document is not applicable to interfaces manufactured before the date of its publication.

Obsah

ČSN EN 1459-4+A1 This document specifies the safety requirements and means of verification in addition to EN 1459-1:2025 and EN 1459-2:2015+A1:2018 as applicable, for rough-terrain variable-reach trucks (hereafter referred to as trucks) designed and intended for handling suspended loads which can swing freely in one or more directions. It is applicable to trucks covered by EN 1459-1:2025" and EN 1459-2:2015+A1:2018. This document does not apply to: - the lifting of suspended loads which by design of the load or the lifting attachments does not allow the load to swing freely in any direction; - the handling of flexible intermediate bulk containers, as defined in EN ISO 21898:2005, carried under the forks of the truck or with attachments intended for this purpose; - any attachments / means used for lifting personnel; - lifting accessories; - freight container handling trucks; - mobile cranes (covered by EN 13000:2010+A1:2014). This document deals with all significant hazards, hazardous situations or hazardous events, related to trucks handling a freely suspended load, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document does not deal with load limiter for attachments. This document is not applicable to rough-terrain variable-reach trucks designed and intended for handling suspended loads manufactured before the date of its publication.