Normy

Obsah

ČSN EN IEC 62074-1 ed. 3 Tato norma se týká optických vláknových zařízení WDM vyznačujících se následujícími obecnými vlastnostmi: jsou to pasivní zařízení, neobsahují žádné optoelektronické nebo jiné převodníky; mohou však používat součásti zajišťující teplotní stabilizaci zařízení; neobsahují funkce optického přepínání; mají tři nebo více bran pro vstup nebo výstup optického výkonu a sdílejí optický výkon mezi těmito branami předem stanoveným způsobem v závislosti na vlnové délce; brány jsou tvořeny optickými vlákny, nebo optickými konektory. Norma stanovuje jednotné požadavky na optické, mechanické a environmentální vlastnosti.

Obsah

ČSN EN IEC 63322 This document establishes security requirements of ME equipment using high-activity sealed radioactive sources, directly or indirectly, for medical treatment and other clinical procedures. ME equipment containing sealed radioactive sources that are defined as category 1, 2 and 3 radioactive sources by IAEA are subject to this document.

Obsah

ČSN EN ISO 17268-1 This document specifies the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors. GHLV refuelling connectors consist of the following components, as applicable: - receptacle and protective cap (mounted on vehicle); - nozzle; - communication hardware. This document is applicable to refuelling connectors which have nominal working pressures or hydrogen service levels up to 70 MPa and maximum flow rates up to 120 g/s. This document is not applicable to refuelling connectors dispensing blends of hydrogen with natural gas.

Obsah

ČSN EN 18110 This document is concerned with the assessment of fish survival in pumping stations and hydropower plants, defined as the fraction of fish that passes an installation without significant injury. It does not concern indirect consequences of such installations, usually included in the notions 'fish safety' or 'fish-friendliness', like avoidance of fish affecting migration, behavioural changes, injury during attempted upstream passage, temporary stunning of fish resulting in potential predation, hypoxia due to depleted oxygen levels in turbine intakes positioned deep below the water surface, or the opposite, gas bubble disease in highly turbulent water near the discharge of a turbine. This document applies to pumps and turbines as well as pumping stations and hydropower plants that operate in or between bodies of surface water, in rivers, in streams or estuaries containing resident and/or migratory fish stocks. Installations include centrifugal pumps (radial type, mixed-flow type, axial type), Archimedes screws, and water turbines (Francis type, Kaplan type, Bulb type, Straflo type, etc.). The following methods to assess fish survival are described: - Survival tests involving the paired release of live fish, introduced in batches of test and control fish upstream and downstream of an installation, and the subsequent recapture in full-flow collection nets. The method is applicable to survival tests in the field and in a laboratory environment. (Clause 6); - A validated model-based computational method consisting of a blade encounter model and correlations that quantify the biological response to blade strike (Clause 7). The model is applicable to pumping stations and hydropower plants with a low to medium head (

Obsah

ČSN EN ISO 14607 This document specifies specific requirements for mammary implants. With regard to safety, this document specifies requirements for intended performance, design attributes, materials, design evaluation, manufacturing, packaging, sterilization and information supplied by the manufacturer.

Obsah

ČSN EN IEC 61000-4-2 ed. 3 Tato část normy IEC 61000 se týká požadavků na odolnost a zkušebních metod pro elektrická a elektronická zařízení vystavená výbojům statické elektřiny přímo od obsluhy a od personálu na sousední předměty. Dále specifikuje rozsahy zkušebních úrovní, které se vztahují k různým podmínkám prostředí a instalace, a stanoví zkušební postupy. Cílem tohoto dokumentu je vytvořit společný a reprodukovatelný základ pro hodnocení výkonu elektrických a elektronických zařízení při vystavení elektrostatickým výbojům. Zahrnuje také elektrostatické výboje, které mohou vzniknout od personálu k předmětům v blízkosti zařízení. Tento dokument specifikuje: - ideální průběh výbojového proudu; - rozsah zkušebních úrovní; - zkušební zařízení; - zkušební uspořádání; - zkušební postup; - kalibrační postup; - nejistotu měření. Tento dokument obsahuje specifikace pro zkoušky prováděné v laboratořích a pokyny pro zkoušky po instalaci. Účelem tohoto dokumentu není specifikovat zkoušky, které mají být použity pro konkrétní přístroje nebo systémy. Hlavním cílem je poskytnout obecný základní odkaz všem příslušným výborům pro výrobky. Výbory pro výrobky zůstávají odpovědné za vhodný výběr zkoušek a úroveň přísnosti, která má být použita pro jejich zařízení. Tento dokument nezahrnuje zkoušky určené k hodnocení citlivosti zařízení na elektrostatický výboj (ESD) během manipulace a balení. Není určen k charakterizaci výkonu obvodů ochrany proti ESD.

Obsah

ČSN EN ISO/IEC 19788-1 This document provides a framework that applies to all resources and specifies how to describe resources. It includes rules governing the way in which descriptions are made. This document provides principles, rules and structures for specifying the description of any type of resource; it identifies and establishes attributes for specifying properties, resources classes, vocabularies and application profiles and the rules governing their use. The key principles set out in this document are framed in a user-centric context and aim to meet the requirements of multilingual and cultural adaptability from a global perspective. This document can be used for the specification of metadata describing any type of resource (not only learning resources). This document is information-technology-neutral and defines a set of common approaches. This document specifies generic properties, generic resource classes and predefined rule sets for content value rules. These generic elements are proposed in such a way that they can be widely reused, thereby promoting interoperability. This document is applicable to the development of: - application profiles based on the ISO/IEC 19788 series but not part of it or any other document based on it, - standards consisting of the description of resources (in a broad sense), whether they belong to the domain of education or to any other domain.

Obsah

ČSN EN ISO/IEC 27701 This document specifies requirements for establishing, implementing, maintaining and continually improving a privacy information management system (PIMS). Guidance is also provided to assist in the implementation of the requirements in this document. This document is intended for personally identifiable information (PII) controllers and PII processors holding re-sponsibility and accountability for PII processing. This document is applicable to all types and sizes of organizations, including public and private companies, government entities and not-for-profit organizations.

Obsah

ČSN EN 13763-27 This document specifies test methods for electronic initiation systems. The test methods for electronic initiation systems refer to complete electronic initiation systems but also to electronic detonators, wireless electronic detonators and to firing units, programming units, testing units and control units that are part of an electronic initiation system. Other parts of the EN 13763 series contain test methods applicable to electronic detonators, too. This document does not apply to electric, non-electric, plain and semi-finished detonators, surface connectors, detonating cord relays, coupling accessories, leading wires and shock tubes.

Obsah

ČSN EN 13763-1 This document specifies the requirements for electric detonators, non-electric detonators, electronic detonators, plain detonators, semi-finished detonators, electronic initiation systems, surface connectors, shock tubes and detonating cord relays.

Obsah

ČSN EN ISO/IEEE 11073-10472 Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard esta-blishes a normative definition of the communication between medication monitoring devices and managers (e.g., cell phones, personal computers, personal health appliances, set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards, including ISO/IEEE 11073 terminology, information models and application profile. It specifies the use of specific term codes, formats, and behaviors in telehealth environments restricting ambiguity in base frameworks in favor of interoperability. This standard defines a common core of communication functionality for medication monitors. In this context, medication monitors are defined as devices that have the ability to determine and communicate (to a manager) measures of a user's adherence to a medication regime.

Obsah

ČSN EN 12480 This document specifies ranges, construction, performances, output characteristics and testing of rotary displacement gas meters (hereinafter referred to as RD meters or simply meters) for gas volume measurement. This document applies to rotary displacement gas meters used to measure the volume of fuel gases of at least the 1st, 2nd and 3rd gas families, the composition of which is specified in EN 437:2021, at a maximum working pressure up to and including 20 bar over an ambient and gas temperature range of at least -10 °C to +40 °C. This document applies to meters that are installed in locations with vibration and shocks of low significance (class M1) and in - closed locations (indoor or outdoor with protection) with condensing or with non-condensing humidity or, - open locations (outdoor without any covering) with condensing humidity or with non-condensing humidity, and in locations with electromagnetic disturbances (class E1 and E2). The standard applies to mechanical meters with mechanical index, electronic devices are not covered by this standard. Unless otherwise specified in this standard: - all pressures used are gauge; - all influence quantities, except the one under test, are kept relatively constant at their reference value. This document applies to meters with a maximum allowable pressure PS and the volume V of less than 6 000 bar ˙ L or with a product of PS and DN of less than 3 000 bar. This document is to be used for both pattern approval and individual meter testing. Cross-reference tables are given in: - Annex A for the tests that need to be undertaken for pattern approval; - Annex B for individual meter testing. Some parts of this standard cover meters with mechanical index only. The risk philosophy adopted in this standard is based on the analysis of hazards including pressure. The standard applies principles to eliminate or reduce hazards. Where these hazards cannot be eliminated appropriate protection measures are specified.