Filtrace produktů
ČSN EN 14691 Hydroizolační pásy a fólie - Hydroizolace betonových mostovek a ostatních pojížděných betonových ploch - Stanovení soudržnosti po tepelném zatížení
Obsah
ČSN EN 14691 This European Standard specifies a test method for the evaluation of the compatibility of the waterproofing system applied to a concrete surface and covered with an asphalt layer. The complete system is exposed to an accelerated heat conditioning followed by a determination of the shear strength properties before and after heat conditioning.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 14692 Hydroizolační pásy a fólie - Hydroizolace betonových mostovek a ostatních pojížděných betonových ploch - Stanovení odolnosti proti hutnění asfaltové vrstvy
Obsah
ČSN EN 14692 This European Standard specifies a test method for the evaluation of the resistance of a waterproofing sheet to the compaction of an asphalt layer.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 14223 Hydroizolační pásy a fólie - Hydroizolace betonových mostovek a ostatních pojížděných betonových ploch - Stanovení nasákavosti
Obsah
ČSN EN 14223 This European Standard specifies a test method for the determination of water absorption in waterproofing sheets which could influence the functional behaviour of these sheets.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 14187-3 Zálivky za studena - Část 3: Zkušební metoda pro stanovení samonivelačních vlastností
Obsah
ČSN EN 14187-3 This European Standard describes a test method for determination of the self-levelling properties of cold applied normal and fuel resistant joint sealants for concrete pavements to be used in roads, airfields and other trafficked areas.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 14187-8 Zálivky za studena - Část 8: Zkušební metoda pro stanovení umělého stárnutí vlivem UV záření
Obsah
ČSN EN 14187-8 This European Standard describes a test method for evaluating the resistance of cold applied joint sealants to the action of UV-light by determination of the change of physical properties after irradiation by artificial UV-light.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 13100-1 Nedestruktivní zkoušení svarových spojů polotovarů z termoplastů - Část 1: Vizuální kontrola
Obsah
ČSN EN 13100-1 This European standard covers the visual examination of welds in thermoplastic materials. It may also be applied to visual testing of the joint prior to and during the welding.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 6076 Letectví a kosmonautika - Statické těsnicí prvky - Ethylen-propylenový O-kroužek pro hrdlo trubky s přímým závitem, lisovaný, odolný vůči esterům fosfátu (-55 °C až 107 °C) - Palcová řada
Obsah
ČSN EN 6076 This European Standard specifies the characteristics of configuration, dimensions, tolerances and mass for moulded O-Ring seal elements, phosphate ester fluid resistant, for straight thread tube fitting boss for use as static seals in hydraulic systems for aerospace application. Application temperature range: -55 °C to 107 °C of continuous operation.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 4801 Letectví a kosmonautika - Přírubové spojky - Otočná příruba se 3 upevňovacími otvory, ze žáruvzdorné oceli - Palcová řada
Obsah
ČSN EN 4801 This European Standard specifies the characteristics of swivel flanges, 3 holes, for flange couplings in heat resisting steel for inch series aerospace applications. Nominal pressure: up to 21 000 kPa; depends on associated seal, tube material, tube diameter and tube wall thickness in the assembly (see EN 4814). NOTE: Assembly in accordance with TR 4815.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 4802 Letectví a kosmonautika - Přírubové spojky - Otočná příruba se 3 upevňovacími otvory, ze slitiny niklu - Palcová řada
Obsah
ČSN EN 4802 This European Standard specifies the characteristics of swivel flanges, 3 holes, for flange couplings in nickel alloy for inch series aerospace applications. Nominal pressure: up to 21 000 kPa; depends on the associated seal, tube material, tube diameter and tube wall thickness in the assembly (see EN 4814). NOTE: Assembly in accordance with TR 4815.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 4803 Letectví a kosmonautika - Přírubové spojky - Otočná příruba se 4 upevňovacími otvory, ze žáruvzdorné oceli - Palcová řada
Obsah
ČSN EN 4803 This European Standard specifies the characteristics of swivel flanges, 4 holes, for pipe couplings in heat resisting steel for inch series aerospace applications. Nominal pressure: up to 21 000 kPa; depends on the associated seal, tube material, tube diameter and tube wall thickness in the assembly (see EN 4814). NOTE: Assembly in accordance with TR 4815.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 4808 Letectví a kosmonautika - Přírubové spojky - Svařovaný spoj, koleno 90°, ze slitiny niklu - Palcová řada
Obsah
ČSN EN 4808 This standard specifies the characteristics of straight welded coupling in nickel alloy for swivel flange couplings for inch series aerospace applications. Nominal pressure: The parts shall withstand nominal pressures given in Table 1. The nominal pressure of the assembly depends on associated seal, tube material characteristics, tube diameter and tube wall thickness (see EN 4814). NOTE: Assembly in accordance with TR 4815.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 4810 Letectví a kosmonautika - Přírubové spojky - Ploché těsnění s těsněním typu C ze slitiny niklu na desce ze žáruvzdorné oceli se 3 upevňovacími otvory - Palcová řada
Obsah
ČSN EN 4810 This standard specifies the characteristics of gasket seal with nickel alloy C seal on heat resisting steel, 3 holes, for pipe couplings for inch series aerospace applications. Nominal pressure: up to 21 000 kPa; depends on the associated tube material and tube wall thickness in the assembly (see EN 4814). Temperature range: -55 °C to 600 °C. NOTE - Assembly in accordance with TR 4815. This part should not be reused after disassembling.
Forma
Cena produktu bez DPH 204 Kč