Normy

Obsah

ČSN EN 62424 ed. 2 Tato norma specifikuje, jak jsou požadavky techniky řízení procesů představovány v P&ID pro automatický přenos dat mezi nářadím P&ID a PCE a vyhýbá se nesprávnému výkladu grafických symbolů P&ID pro PCE. Také definuje výměnu požadavku příslušných dat techniky řízení procesů mezi nářadím techniky řízení procesů a nářadím P&ID pomocí jazyka přenosu dat (nazývaného CAEX). Tato opatření se používají na export a import aplikací tohoto nářadí.

Obsah

ČSN EN 62264-5 ed. 2 IEC 62264-5:2016 defines transactions in terms of information exchanges between applications performing business and manufacturing activities associated with Levels 3 and 4. The exchanges are intended to enable information collection, retrieval, transfer and storage in support of enterprise-control system integration. This part of IEC 62264 is consistent with the IEC 62264-2 and IEC 62264-4 object models attributes. This standard also defines transactions that specify how to exchange the objects defined in IEC 62264-2, IEC 62264-4 and this standard. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The addition of transaction rules for objects defined in IEC 62264-4: Job, Job List, Job Response, Job Response List, Work Alert Definition, Work Alert, Work Calendar Definition, Work Calendar, Work Capability Work Directive, Work Master, Work Performance, Work Record, Work Schedule, Workflow Specification Node Type, Workflow Specification. It is published as a double logo standard.

Obsah

ČSN EN 62052-31 (35 6134) Tato část souboru norem specifikuje požadavky na bezpečnost výrobku pro zařízení pro měření elektrické energie a ovládání. Tato norma se použije na nově vyrobené elektroměry určené k měření a ovládání elektrické energie v sítích 50 Hz nebo 60 Hz s napětím až do 600 V, kde jsou veškeré funkční prvky včetně přídavných modulů uzavřeny do jedné skřínky. Norma se použije i na elektroměry obsahující spínače pro ovládání zátěže, ale pouze elektromechanické.

Obsah

ČSN EN 62256 ed. 2 This document covers turbines, storage pumps and pump-turbines of all sizes and of the following types: Francis; Kaplan; propeller; Pelton (turbines only); bulb turbines. This document also identifies without detailed discussion, other powerhouse equipment that could affect or be affected by a turbine, storage pump, or pump-turbine rehabilitation. The object of this document is to assist in identifying, evaluating and executing rehabilitation and performance improvement projects for hydraulic turbines, storage pumps and pump-turbines. This document can be used by owners, consultants, and suppliers to define: needs and economics for rehabilitation and performance improvement; scope of work; specifications; evaluation of results. This document is intended to be: an aid in the decision process; an extensive source of information on rehabilitation; an identification of the key milestones in the rehabilitation process; an identification of the points to be addressed in the decision processes. This document is not intended to be a detailed engineering manual nor a maintenance document.

Obsah

ČSN EN 62586-2 ed. 2 (35 6240) Tato část souboru norem specifikuje funkční zkoušky a požadavky na nejistotu pro přístroje, jejichž funkce zahrnují měření, záznam a možné sledování parametrů kvality elektřiny systémech elektrického napájení a jejich měřicí metody (třída A nebo třída S) jsou definovány v ČSN EN 61000-4-30 (33 3432). Tato norma se použije na přístroje pro měření kvality elektřiny podle ČSN EN 62586-1. Tato norma může být také odkazována v ostatních normách pro výrobky (např. digitální záznamníky poruch, elektroměry pro tržbu, ochranná relé pro vysoké a velmi vysoké napětí) popisujíc zařízení s funkcemi kvality elektřiny podle ČSN EN 61000-4-30 (33 3432). Požadavky normy jsou použitelné na jednofázové, dvoufázové a trojfázové střídavé napájecí systémy o kmitočtech 50 Hz nebo 60 Hz. Není záměrem normy popisovat uživatelské rozhraní nebo témata netýkající se provozu měřicího zařízení. Norma nepokrývá zpracování a interpretaci dat, například vyhrazeným softwarem.

Obsah

ČSN EN 61360-1 ed. 3 Tato norma specifikuje zásady pro definici vlastností a přidružených atributů a vysvětluje metody pro reprezentování slovně definovaných pojmů s vhodnými konstrukcemi dat dostupnými v IEC 61360-2. Specifikuje také zásady pro stanovení hierarchie klasifikace z kolekce tříd, z nichž každá představuje technickou koncepci v elektrotechnické oblasti nebo oblast týkající se elektrotechnologie.

Obsah

ČSN EN 50463-4 ed. 2 Tato evropská norma se vztahuje na komunikační služby na palubě vlaku a mezi palubou vlaku a pozemní komunikační službou, tzn., že zahrnuje datovou komunikaci využívající digitální rozhraní: a) mezi funkcemi implementovanými v rámci EMS; b) mezi funkcí EMS a ostatními palubními subsystémy; c) mezi EMS a pozemními komunikačními službami. Datové komunikační služby EMS na palubě vlaku zahrnují výměnu dat mezi funkcemi EMS a výměnu dat mezi EMS a dalšími jednotkami na palubě, kde dochází k výměně dat pomocí souboru komunikačních protokolů přes vyhrazené fyzické rozhraní nebo sdílenou komunikační síť. Komunikační služby mezi palubou a zemí zahrnují bezdrátovou komunikaci pro přenos dat mezi DHS a pozemním serverem. Tento dokument rovněž obsahuje požadavky na posuzování shody.

Obsah

ČSN ETSI EN 300 444 V2.5.1 The present document specifies that set of technical requirements for Digital Enhanced Cordless Telecommunications (DECT) Fixed Part (FP) and DECT Portable Part (PP) necessary for the support of the Generic Access Profile (GAP). The GAP is applicable to all DECT Portable radio Terminations (PT) and Fixed radio Terminations (FT) which under the scope of ETSI EN 300 176-2 [10] (i.e. 3,1 kHz telephony teleservice) and specifies the minimum functionality that is supported by all other 3,1 kHz voice profiles. The objective of the present document is to ensure the Air Interface (AI) inter-operability of DECT equipment capable of 3,1 kHz telephony applications, in such a way that any DECT PT conforming to the procedures described in the present document is inter-operable with any DECT FT conforming to the procedures described in the present document. The profile consists of the minimum mandatory requirements that allow a 3,1 kHz teleservice connection to be established, maintained and released between a FT and a PT with the appropriate access rights, irrespective of whether the FP provides residential, business or public access services. In addition, the present document defines the features, services, procedures etc. for both the FT and the PT, which are provision mandatory either in the PT or in the FT, as well as some elements that are provision optional but still process mandatory. Mobility Management (MM) procedures at the DECT AI to support incoming calls and outgoing calls are included. Inter-working between the FT and the attached network is outside the scope of the present document.

Obsah

ČSN ETSI EN 300 175-4 V2.7.1 The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the Data Link Control (DLC) layer. The DLC layer is part 4 of the DECT CI standard and layer 2b of the DECT protocol stack. Two planes of operation are specified for this DLC (sub)layer. These planes are called the Control plane (C-plane) and the User plane (U-plane). The C-plane is mostly concerned with the DECT signalling aspects. It provides a reliable point-to-point service that uses a link access protocol to offer error protected transmission of Network (NWK) layer messages. The C-plane also provides a separate point-to-multipoint (broadcast) service (Lb). The U-plane is only concerned with end-to-end user information. This plane contains most of the application dependent procedures of DECT. Several alternative services (both circuit-mode and packet-mode) are defined as a family of independent entities. Each service provides one or more point-to-point U-plane data links, where the detailed characteristics of those links are determined by the particular needs of each service. The defined services cover a wide range of performance, from "unprotected with low delay" for speech applications to "highly protected with variable delay", for local area network applications. NOTE: The performance of the DLC services need not be tight to any particular application. For example the "unprotected with low delay" service could also be used for data applications, e.g. if some data protection is provided outside the DECT protocol. The present document uses the layered model principles and terminology as described in Recommendations ITU T X.200 [14] and X.210 [15]. The present document includes New Generation DECT, a further development of the DECT standard introducing wideband speech, improved data services, new slot types and other technical enhancements.

Obsah

ČSN ETSI EN 300 175-7 V2.7.1 The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the security architecture, the types of cryptographic algorithms required, the way in which they are to be used, and the requirements for integrating the security features provided by the architecture into the DECT CI. It also describes how the features can be managed and how they relate to certain DECT fixed systems and local network configurations. The security architecture is defined in terms of the security services which are to be supported at the CI, the mechanisms which are to be used to provide the services, and the cryptographic parameters, keys and processes which are associated with these mechanisms. The security processes specified in the present document are each based on one of three cryptographic algorithms: - an authentication algorithm; - a key stream generator for MAC layer encryption; and - a key stream generator plus a Message Authentication Code generator for CCM authenticated encryption. The architecture is, however, algorithm independent, and either the DECT standard algorithms, or appropriate proprietary algorithms, or indeed a combination of both can, in principle, be employed. The use of the employed algorithm is specified in the present document. Integration of the security features is specified in terms of the protocol elements and processes required at the Network (NWK) and Medium Access Control (MAC) layers of the CI. The relationship between the security features and various network elements is described in terms of where the security processes and management functions may be provided. The present document does not address implementation issues. For instance, no attempt is made to specify whether the DSAA or DSAA2 should be implemented in the PP at manufacture, or whether the DSAA, DSAA2 or a proprietary authentication algorithm should be implemented in a detachable module. Similarly, the present document does not specify whether the DSC or DSC2 should be implemented in hardware in all PPs at manufacture, or whether special PPs should be manufactured with the DSC, DSC2 or proprietary ciphers built into them. The security architecture supports all these options, although the use of proprietary algorithms may limit roaming and the concurrent use of PPs in different environments. Within the standard authentication algorithms, DSAA2, DSC2 and CCM are stronger than DSAA and DSC and provide superior protection. DSAA2 and DSC2 are based on AES [10] and were created in 2011. CCM is also based on AES [10] and was added to the standard in 2012. The present document includes New Generation DECT, a further development of the DECT standard introducing wideband speech, improved data services, new slot types and other technical enhancements. The present document also includes DECT Ultra Low Energy (ULE), a low rate data technology based on DECT intended for M2M applications with ultra low power consumption.

Obsah

ČSN ETSI EN 300 175-8 V2.7.1 The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). This part of the DECT CI specifies the speech and audio coding and transmission requirements. In order to ensure satisfactory interworking of different portable and fixed units, it is necessary to specify the transmission performance of the analog information over the digital link. This requires not only use of a common speech algorithm, but also standardization of frequency responses, reference speech levels (or loudness) at the air interface and various other parameters. The present document applies to DECT equipment which includes all the necessary functions to provide real time two way speech conversation. Several speech services are defined in the present document, including conventional 3,1 kHz telephony, wideband 7 kHz voice transmission and super-wideband 14 kHz service. DECT Fixed part providing such services may be connected to the public circuit switched (PSTN/ISDN) network, to private networks or to the Internet. Tethered fixed point local loop applications are not required to comply with the requirements of the present document. For the DECT systems which connect to the Public Switched Telephone Network (PSTN) via an analog interface, the additional requirements, which are implemented in the FP, have as much as possible been aligned with ETSI TBR 038 [29]. A summary of the control and the use of the DECT echo control functions, to guide on need for options to manufacturers and installers, is found in annex A. Information concerning test methods can be found in ETSI EN 300 176-1 [9] and ETSI EN 300 176-2 [10] (previously covered by ETSI TBR 010 [i.5]). The test methods take into account that DECT is a digital system. The present document includes New Generation DECT, a further development of the DECT standard introducing wideband speech, improved data services, new slot types and other technical enhancements.

Obsah

ČSN ETSI EN 300 797 V1.3.1 The present document establishes a standard method for transporting Service components (audio and data) produced by Service providers at their own studios to the DAB multiplexing equipment located at the Ensemble provider's centre. The present document is applicable to Collection Networks used in a DAB System. It describes the characteristics of a signal suitable for transporting Service Components, Service Information and control data between a Service provider and an Ensemble provider. The interface is suitable for use on a number of different physical media and telecommunication networks. Provision is made for the inclusion of appropriate error detection and correction and for the management of network transit delay. This version of the present document has been aligned to V2.1.1 of ETSI EN 300 401 [1], by adding control for User Application information.