Normy

Obsah

ČSN EN ISO 19152-2 This document: - defines a reference land administration domain model (LADM) covering basic information-related components of land registration (including elements above and below the surface of the Earth); - provides an abstract, conceptual model with three packages and one sub-package related to: - parties (people and organizations); - basic administrative units, rights, responsibilities and restrictions (RRRs); - spatial units (parcels, and the legal space of buildings and utility networks and other geometry) with a sub-package on surveying and spatial representation (geometry and topology); - provides terminology for land administration (LA), based on various national and international systems, that is as simple as possible in order to be useful in practice. The terminology allows a shared description of different formal or informal practices and procedures in various jurisdictions; - provides a platform for comparison and monitoring that is based on indicators; - provides a basis for national and regional profiles; and - enables the combination of land administration information from different sources in a coherent manner. The following is outside the scope of this document: - interference with (national) land administration laws with potentially legal implications; and - construction of external databases with party data, address data, land cover data, physical utility network data, archive data and taxation data. However, the LADM provides stereotype classes for these data sets to indicate which data set elements the LADM expects from these external sources, if available. This document provides the concepts and the detailed structure for standardization in the land administration domain.

Obsah

ČSN ETSI EN 302 217-2 V3.4.1 The present document specifies technical characteristics and methods of measurements for Point-to-point (P-P) Digital Fixed Radio Systems (DFRS) operating in frequency bands allocated to Fixed Service (FS) from 1 GHz to 174,8 GHz, corresponding to the appropriate frequency bands from 1,4 GHz to 174,8 GHz as described in relevant annexes B through L. Systems in the scope of the present document are generally intended to operate in full Frequency Division Duplex (FDD) and cover also unidirectional links applications. Time Division Duplex (TDD) applications, when possibly applicable in a specific band, are explicitly mentioned as appropriate in the relevant annexes B through L. Other possible prescriptions, limitations and requirements, for operation in specific bands are also explicitly mentioned, as appropriate, in the relevant annexes B through L. Systems in the scope of the present document are intended to operate only in combination with directive fixed gain antennas respecting the technical requirements in ETSI EN 302 217-4 [6]. Systems in the scope of the present document may be composed by equipment without antennas (see informative annex Q for background) or equipment including integral (but physically detachable) or dedicated antenna. Systems including integral antennas physically undetachable from the radio equipment are not in the scope of the present document (see note 1). NOTE 1 - For additional information, the rationale is that the present document as well as ETSI EN 301 126-1 [1] (radio equipment parameters testing) do not provide radiated test methods and ETSI EN 301 126-3-1 [2] (antenna parameters testing) does not provide test methods for undetachable antennas; future revisions could fill this vacancy. NOTE 2 - The relationship between the present document and the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in annex A.

Obsah

ČSN EN 18052 Tento dokument doplňuje normy EN 16454 a EN 17240 a poskytuje sadu zkoušek shody pro zařízení IVS, mobilní sítě a PSAP, které jsou nezbytné k zajištění a prokázání shody s normou EN 17905. Tento dokument upravuje a reviduje postupy zkoušek shody (CTP) uvedené v EN 16454 a EN 17240 s ohledem na hybridní prostředí se sítěmi s přepojováním okruhů/paketů. Tato norma popisuje klíčové aktéry v řetězci poskytování služeb eCall v hybridním prostředí se sítěmi s přepojováním okruhů/paketů, kterými jsou: 1) systém IVS/vozidlo, 2) operátor mobilní sítě (MNO), 3) centrum tísňového volání (PSAP), a poskytuje pro tyto tři skupiny zkoušky shody. Systémy eCall poskytované třetí stranou (TPS-eCall) jsou mimo předmět této normy.

Obsah

ČSN EN ISO 13943 Tento dokument definuje terminologii týkající se požární bezpečnosti používanou v mezinárodních normách ISO a IEC. Termíny uvedené v tomto dokumentu se týkají: - základních pojmů; - specifičtějších pojmů, jako jsou pojmy používané konkrétně v požárním zkoušení nebo v požárněbezpečnostním inženýrství a případně v mezinárodních normách ISO nebo IEC týkajících se požárů; a - souvisejících pojmů, jako jsou pojmy používané ve stavbách a stavebním inženýrství. Struktura je navržena v souladu s ISO 10241-1:2011. Termíny jsou uvedeny v anglickém abecedním pořadí a preferované termíny jsou napsány tučným písmem, přičemž připuštěné a nevhodné termíny jsou uvedeny níže normálním typem písma.

Obsah

ČSN EN 1993-1-6 This document provides supplementary rules for the structural design of steel structures that extend and modify the application of EN 1993-1-1, EN 1993-1-3, EN 1993-1-5 and EN 1993-1-8 to austenitic, duplex (austenitic-ferritic) and ferritic stainless steels. NOTE 1 - Austenitic-ferritic stainless steels are commonly known as duplex stainless steels. The term duplex stainless steel is used in this document. NOTE 2 - Information on the durability of stainless steels is given in Annex A. NOTE 3 - The execution of stainless steel structures is covered in EN 1090-2 and EN 1090-4. Assumptions 1) Unless specifically stated, EN 1990, EN 1991 (all parts), EN 1993-1-1, EN 1993-1-3, EN 1993-1-5 and EN 1993-1-8 apply. 2) The design methods given in EN 1993-1-4 are applicable if: - the execution quality is as specified in EN 1090-2 and EN 1090-4, and - the construction

Obsah

ČSN EN ISO 16484-4 This document specifies control applications and function blocks focusing on, but not limited to, lighting, solar protection and heating, ventilation and air conditioning (HVAC) applications. It describes how energy performance, comfort, and operational requirements of buildings are translated into functional specifications for integrated plant and room control.

Obsah

ČSN ISO 19450 Tento dokument specifikuje Objektově Procesní Metodiku (OPM) s podrobnostmi dostatečnými k tomu, aby umožnili odborníkům využívat pojmy, sémantiku a syntaxi OPM jako modelovacího paradigmatu a jazyka pro vytváření pojmových modelů v různé míře detailů a pro umožnění dodavatelům nástrojů poskytovat produkty pro modelování aplikací na pomoc těmto praktikům. I když tento dokument uvádí některé příklady použití OPM ke zlepšení srozumitelnosti, nesnaží se poskytnout úplný odkaz na všechny možné aplikace OPM.

Obsah

ČSN EN IEC 61095 ed. 3 This document applies to electromechanical air break contactors for household and similar purposes provided with main contacts intended to be connected to circuits the rated voltage of which does not exceed 440 V AC (between phases) with rated operational currents less than or equal to 63 A for utilization category AC-7a, and 32 A for utilization categories AC 7b, AC 7c and AC-7d (expressed in rated power), and rated conditional short-circuit current less than or equal to 6 kA. Specific requirements apply to contactors equipped with screwless-type terminals. This document does not apply to contactors complying with IEC 60947-4-1, semiconductor contactors, contactors designed for special applications and auxiliary contacts of contactors. These are dealt with in IEC 60947-5-1. This document states the characteristics of contactors, the conditions with which contactors comply with reference to their operation and behaviour, their dielectric properties, the degrees of protection provided by their enclosures, where applicable, their construction, their electromagnetic compatibility characteristics, the tests intended for confirming that these conditions have been met, and the methods to be adopted for these tests, the test sequences and the number of samples and the information to be given with contactors or in the manufacturer's literature.

Obsah

ČSN EN ISO/IEEE 11073-10103 This document extends the base nomenclature provided in ISO/IEEE 11073-10101:2020 to support terminology for implantable cardiac devices. Devices within the scope of this nomenclature are implantable devices such as pacemakers, defibrillators, devices for cardiac resynchronization therapy, and implantable cardiac monitors. This nomenclature defines the terms necessary to convey a clinically relevant summary of the information obta-ined during a device interrogation. The nomenclature extensions may be used in conjunction with other IEEE 11073 standard components (e.g., ISO/IEEE 11073-10201 [B2]) or with other standards, such as Health Level Seven International (HL7).

Obsah

ČSN EN 1998-4 (1) This document is applicable to the seismic design of on-ground and elevated silos, on-ground, elevated and underground tanks, above-ground and buried pipeline systems, towers, masts and chi-mneys and ancillary elements attached to these structures or in industrial facilities. (2) Unless specifically stated, EN 1998-1-1 and EN 1998-5 apply. (3) EN 1998-4 is applicable in complement to the other relevant Eurocodes. NOTE - This document contains only those provisions that, in addition to the provisions of the other relevant Eurocodes, are used for the design of new structures, as listed in (1), in seismic regions. EN 1998-4 complements in this respect the other Eurocodes.

Obsah

ČSN EN 81-42 1.1 This document specifies safety requirements for design, construction and manufacturing of permanently installed electrically powered vertical lifting appliances affixed to a building structure intended for use by persons, including persons with disability: - travelling vertically between predefined levels along a guided path whose inclination to the vertical does not exceed 15°; - supported or sustained by rack and pinion, rope traction drive, noncircular elastomeric-coated suspension means (hereafter called traction belts) traction drive, rope positive drive, chains, timing belts, screw and nut, guided chain or hydraulic jack (direct or indirect); - with enclosed wells; - with a rated speed not greater than 0,15 m/s; - with the carrier completely enclosed; - with a temperature in the well and in the machinery spaces between +5 °C and +40 °C. 1.2 This document does not specify additional requirements for: - lightning protection; - operation subject to ATEX rules; - lifting appliances whose primary function is the transportation of goods; - earthquakes, flooding; - firefighting and evacuation; - noise and vibrations; - the transport of type-C wheelchairs as defined in EN 12183:2022 and/or EN 12184:2022; - vertically sliding doors. 1.3 Components incorporated in a lifting appliance installation are: a) designed in accordance with usual engineering practice and calculation codes, taking into account all failure modes; b) of sound mechanical and electrical construction; c) free of defects. 1.4 This document is not applicable to lifting appliances manufactured before the date of its publication.

Obsah

ČSN P CEN/TS 16157-11 Tato norma stanoví dílčí model publikace v rámci modelu DATEX II, který podporuje publikaci elektronických dopravních opatření a regulovaných zón. Tyto publikace jsou určeny pro zasílání informací mezi dopravními úřady vydávajícími dopravní předpisy a organizacemi, které tyto předpisy provádějí, a dalšími organizacemi poskytujícími ITS služby nebo zajišťujícími další výměnu informací.