Normy

Obsah

ČSN EN ISO 5667-1 Tento dokument určuje obecné zásady a poskytuje návod pro sestavování programů vzorkování a pro způsoby odběru vzorků pro všechny aspekty odběru vzorků vod (včetně odpadních vod, kalů, plavenin a sedimentů). Tento dokument neobsahuje podrobné pokyny pro určité situace při odběru vzorků, které jsou zahrnuty v různých dalších částech ISO 5667 a v ISO 19458.

Obsah

ČSN EN ISO 7704 Tento dokument stanovuje požadavky na zkoušení výkonnosti membránových filtrů používaných pro zachycení a následné přímé stanovení počtu mikroorganismů kultivačními metodami. Tento dokument se používá pro membránové filtry, které se užívají pro zachycení a následné přímé stanovení počtu specifických mikroorganismů na pevných médiích nebo na jiných zařízeních obsahujících média, například na podložkách s absorbentem. Tento dokument se nepoužívá pro membránové filtry užívané pro koncentrování a eluci nebo pro kvalitativní metody. Tyto zkoušky se používají pro membránové filtry určené pro mikrobiologický rozbor různých druhů vod, například: - pitné vody, balené vody a dalších druhů vod s očekávanými nízkými počty mikroorganismů; - vod s očekávanými vyššími počty mikroorganismů, například povrchových vod a provozní vody. Tyto zkoušky mají prokázat vhodnost celého systému (membránového filtru spolu s kultivačním médiem včetně kroku filtrace) potřebného pro specifické zkoušky. Tento dokument se týká: - výrobců membránových filtrů; - mikrobiologických laboratoří používajících membránové filtry, a to pro jejich vlastní zkoušky nebo pro provádění zkoušek pro další koncové uživatele.

Obsah

ČSN EN ISO 23702-1 This document specifies a test method for detection and quantification of extractable non-volatile per- and polyfluoroalkyl substances (PFAS) in leather and coated leather by solvent extraction and liquid chromatography coupled with mass spectrometry. This document, taking into account the three-dimensional distribution of the fibres within leather, makes the evaluation of the PFAS with respect to the mass. PFAS substances categories and applications are listed in Annex A, Table A.1. Classes of PFAS regulated compounds listed in Annex B, Table B.1, include acids, telomers, sulfonates and sulphonamide alcohols. Classes of other non-regulated compounds that can be determined by this document are listed in Annex C, Table C.1.

Obsah

ČSN EN ISO 19150-6 This document establishes a standard registration and maintenance mechanism for the registration of ISO 19150-4-conformant geographic information service ontologies. This document makes use of ISO 19135-1 whenever appropriate. This document does not define semantics operators or rules for ontologies, and does not develop any application ontology. In relation to ISO 19101-1:2014, 6.2, this document defines and formalizes the following purposes of the ISO geographic information reference model: - geographic information service components and their behaviour for data processing purposes over the Web; and - OWL ontologies to cast ISO/TC 211 International Standards to benefit from and support the Semantic Web. In relation to ISO 19101-1:2014, 8.3, this document addresses the Application:Procedural foundation of the ISO geographic information reference model

Obsah

ČSN EN ISO 11239 This document specifies: - the data elements, structures and relationships between the data elements required for the exchange of in-formation, which uniquely and with certainty identify pharmaceutical dose forms, units of presentation, routes of administration and packaging items (containers, closures and administration devices) related to medicinal products; - a mechanism for the association of translations of a single concept into different languages, which is an in-tegral part of the information exchange; - a mechanism for the versioning of the concepts in order to track their evolution; - rules to help regional authorities to map existing regional terms to the terms created using this document, in a harmonized and meaningful way.

Obsah

ČSN ISO 1087 Tento dokument stanovuje základní termíny a definice pro terminologickou práci a pro nauku o terminologii. Neobsahuje termíny a definice, které jsou specifické pro počítačové aplikace v terminologické práci.

Obsah

ČSN ISO 21219-17 Soubor norem ISO 21219 stanoví formát a protokol TPEG určený pro poskytování informací o dopravě koncovým uživatelům. Tato norma stanovuje aplikaci TPEG2-SPI pro informace o omezení rychlosti na pozemních komunikacích. Aplikace poskytuje k jednotlivým úsekům, formou staničení (od-do), informace o hodnotě, typu a příčině omezení rychlosti až na úroveň jízdních pruhů s určením typu vozidel. Typ omezení rychlosti může být maximální, minimální či doporučený, daný hodnotou rychlosti či odstupem vozidel. Příčina může být dána aktuální situací na pozemní komunikaci (práce na silnici), typem provozu (zelená vlna) či polohou (škola, nemocnice). Informace o omezení rychlosti jsou navrženy pro maximální efektivitu využití přenosového pásma.

Obsah

ČSN EN 50436-1 ed. 3 This document specifies test methods and performance requirements for alcohol interlocks having a mouthpiece. It covers alcohol interlocks to be used in all general preventive programmes and those for drink driving offenders and legally regulated programmes monitored or controlled in a comparable way. This document can also be used for alcohol interlocks intended for other applications. This document is directed at test laboratories and manufacturers of alcohol interlocks. It defines requirements and test procedures for type testing. Several parameters (such as alcohol concentration or breath volume) are specified in this document for the purpose of type testing according to this document only. NOTE - It can be necessary due to national regulations or depending on user requests to set the values of the prescribed parameters differently when the alcohol interlocks are in use. This document also applies to alcohol interlocks integrated into control systems of the vehicle as well as to accessory devices connected to the alcohol interlock. This document does not apply to - instruments measuring the alcohol concentration in the ambient air in the vehicle, - alcohol interlocks not having a mouthpiece, - methods of installation and connections to the vehicle.

Obsah

ČSN EN 16602-70-40 This Standard specifies the processing and quality assurance requirements for brazing processes for space flight applications. Brazing is understood as the joining and sealing of materials by means of a solidification of a liquid filler metal. The term brazing in this standard is used as equivalent to soldering, in cases that the filler materials have liquidus temperatures below 450 °C. Brazing and soldering are allied processes to welding and this standard is supplementing the standard for welding ECSS-Q-ST-70-39. This standard does not cover requirements for: - Joining processes by adhesive bonding (ECSS-Q-ST-70-16), - Soldering for electronic assembly purposes (ECSS-Q-ST-70-61), - Soldering used in hybrid manufacturing (ESCC 2566000). The standard covers but is not limited to the following brazing processes: - Torch brazing, - Furnace brazing, - Dip Brazing and Salt-bath brazing, - Induction Brazing. This Standard does not detail the brazing definition phase and brazing pre-verification phase, including the derivation of design allowables. This standard may be tailored for the specific characteristic and constraints of a space project in conformance with ECSS-S-ST-00.

Obsah

ČSN EN ISO 8529-1 This document specifies the neutron reference radiation fields, in the energy range from thermal up to 20 MeV, for calibrating neutron-measuring devices used for radiation protection purposes and for determining their response as a function of neutron energy. This document is concerned only with the methods of producing and characterizing the neutron reference radiation fields. The procedures for applying these radiation fields for calibrations are described in References ISO 8529-2 and ISO 8529-3. The neutron reference radiation fields specified are the following: - neutron fields from radionuclide sources, including neutron fields from sources in a moderator; - neutron fields produced by nuclear reactions with charged particles from accelerators; - neutron fields from reactors. In view of the methods of production and use of them, these neutron reference radiation fields are divided, for the purposes of this document, into the following three separate clauses: - In Clause 4, radionuclide neutron sources with wide spectra are specified for the calibration of neutron-measuring devices. These sources should be used by laboratories engaged in the routine calibration of neutron-measuring devices, the particular design of which has already been type tested. - In Clause 5, accelerator-produced monoenergetic neutrons and reactor-produced neutrons with wide or quasi monoenergetic spectra are specified for determining the response of neutron measuring devices as a function of neutron energy. Since these neutron reference radiation fields are produced at specialized and well-equipped laboratories, only the minimum of experimental detail is given. - In Clause 6, thermal neutron fields are specified. These fields can be produced by moderated radionuclide sources, accelerators, or reactors.

Obsah

ČSN EN ISO 21909-2 This document provides methodology and criteria to qualify the dosimetry system at workplaces where it is used. The criteria in this document apply to dosimetry systems which do not meet the criteria with regard to energy and direction dependent responses described in ISO 21909-1. The qualification of the dosimetry system at workplace aims to demonstrate that: - either, the non-conformity of the dosimetry system to some of the requirements on the energy or direction dependent responses defined in ISO 21909-1 does not lead to significant discrepancies in the dose determination for a certain workplace field; - or, that the correction factor or function used for this specific studied workplace enables the dosimetry system to accurately determine the conventional dose value with uncertainties similar to the ones given in ISO 21909-1. The methodologies to characterize the work place field in order to perform the qualification of the dosimetry system are given in Annex A. Annex B is complementary as it gives the practical methods to follow, once one methodology is chosen. The provider of the dosimetry system shall provide the type test results corresponding to ISO 21909-1. However, when the dosimetry system to be qualified does not comply with all the criteria of ISO 21909-1 dealing with the energy and angle dependence of the response, some tests of the ISO 21909-1 can be not performed. This document only addresses neutron personal monitoring and not criticality accident conditions.

Obsah

ČSN EN ISO 6603-2 This document specifies a test method for the determination of puncture impact properties of rigid plastics, in the form of flat specimens, using instruments for measuring force and deflection. It is applicable if a force-deflection or force-time diagram, recorded at nominal constant striker velocity, is necessary for detailed characterization of the impact behaviour. The test method is applicable to specimens with a thickness between 1 mm to 4 mm. The method is suitable for use with the following types of material: - rigid thermoplastic moulding and extrusion materials, including filled, unfilled and reinforced compounds and sheets; - rigid thermosetting moulding and extrusion materials, including filled and reinforced compounds, sheets and laminates; - fibre-reinforced thermoset and thermoplastic composites incorporating unidirectional or multi-directional reinforcements such as mats, woven fabrics, woven rovings, chopped strands, combination and hybrid reinforcements, rovings, milled fibres and sheets made from pre-impregnated materials (prepregs). The method is also applicable to specimens which are either moulded or machined from finished products, laminates and extruded or cast sheet. The test results are comparable only if the conditions of preparation of the specimens, their dimensions and surfaces as well as the test conditions are the same. In particular, results determined on specimens of different thickness cannot be compared with one another. Comprehensive evaluation of the reaction to impact stress can be obtained by determinations made as a function of impact velocity and temperature for different material variables, such as crystallinity and moisture content. The impact behaviour of finished products cannot be predicted directly from this test, but specimens may be taken from finished products (see above) for tests by this method. Test data developed by this method is not intended to be used for design calculations. However, information on the typical behaviour of the material can be obtained by testing at different temperatures and impact velocities by varying the thickness and by testing specimens prepared under different conditions. It is not the purpose of this document to give an interpretation of the mechanism occurring on every particular point of the force-deflection diagram. These interpretations are a task for scientific research.