Normy

Obsah

ČSN EN 12369-1 This document provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995-1-1. This document includes the characteristic values of both the mechanical properties and density for the panels set out below: - OSB/2, OSB/3 and OSB/4, complying with EN 300; - Particleboard, P4, P5 P6, P7 complying with EN 312; - Hardboard, HB.HLA2 complying with EN 622-2; - Medium board, MBH.LA2 complying with EN 622-3; - MDF.LA and MDF.HLS complying with EN 622-5; - MDF.RWH complying with EN 622-5.

Obsah

ČSN P CEN/TS 17152-4 This document gives guidance on the structural design of underground modular systems for infiltration, attenuation and storage of surface water under various conditions of loading. The procedures are explained, with the appropriate variables in the design formulae, and provides graphical information on vehicle surcharge loadings. These modular systems are constructed from multiple cuboid shaped thermoplastic boxes generally with ancillary components such as inlet/outlet connectors, vents, and access/inspection provision. This guidance is for the design of modular systems conforming to EN 17152-1. The boxes, including integral components, are injection moulded, extruded or thermoformed thermoplastics, manufactured from polypropylene (PP) or unplasticized poly(vinyl chloride) (PVC-U), and are intended to be used as elements in a modular system where the manufacturer has clearly stated in the documentation how the components are assembled to create a complete infiltration, attenuation or storage system. Outside the scope of this document are the following conditions: - seismic loads; - lateral loads from adjacent structures and embankments; - influence of trees; - backfill materials not according to CEN/TR 17179 [1]. Geotextile and/or geomembrane used with modular systems are outside the scope of this document. NOTE - If reference is made in this document to Eurocode standards, the conditions in a national foreword or national annex are normally stated.

Obsah

ČSN EN 14620-5 This document is applicable to the design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -196°C. It specifies the requirements for testing, drying, purging, cool-down and decommissioning of refrigerated liquefied gas storage tank systems. The tank systems covered by this document are used to store large volumes of hydrocarbon products, ammonia and other non-hydrocarbon gases with low temperature boiling points, generally called "Refrigerated Liquefied Gases" (RLGs). Typical products stored in the tank systems are: methane, ethane, propane, butane, ethylene, propylene, butadiene (this range includes Liquefied Natural Gas (LNG) and Liquefied Petroleum Gas (LPG), ammonia, nitrogen, oxygen and argon. NOTE - Properties of the gases are given in Annex A EN 14620-1:2024. This document provides requirements and specifies measures to be taken following completion of major tank construction activities and before the tank is brought in to service. It provides requirements for full-height and partial height hydrostatic testing to check the structural integrity of tanks and the capacity of the foundations. Settlement monitoring of the foundations at this stage form the starting point of an annual settlement monitoring programme for the tank foundation. Recommendations are given for marker systems for such monitoring. Requirements for water quality of both fresh water and seawater used during hydrotest, are provided to avoid the risk of corrosion of tanks and appurtenances. Guidance and requirements for positive and negative pneumatic tests to further check tank structural integrity, leak tightness of welds and the function of pressure and vacuum relief valve systems are also given. Requirements specific to testing of double-wall and membrane type tanks is included. Rules and procedures for commissioning activities, including drying and purging with inert and product gas are provided, including required oxygen concentrations for various RLG's. The document also provides guidance for cool-down procedures and suggestions for temperature monitoring, including an informative Annex A. For major maintenance inspection or at the end of the life of the tank, decommissioning will be required. Guidance on safe decommissioning processes is provided. Suggested procedures for Global testing for membrane tanks are provided in informative Annex B This document is applicable to the design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -196°C.

Obsah

ČSN P CEN/TS 16628 (73 0332) This document describes the basic principles to be followed in the development and maintenance of standards intended to support the assessment of the overall energy performance of a building (EPB) using a holistic approach. This document supports the development and maintenance of a set of EPB standards that provides a systematic, clear, consistent and comprehensive methodology for the benefit of professionals and government entities. The main application is the assessment of the overall energy performance of a building in the context of building regulations, e.g. to specify EP requirements, EP rating and EP certificates. The principles cover general and common aspects on the required quality, accuracy, usability, consistency and interoperability of the EPB standards as a set and individually. For that purpose, this document provides guidance on the process, structure and layout of these EPB standards and accompanying publications, complementary to the CEN and ISO internal regulations. This document forms the basis for detailed technical rules given in CEN/TS 16629, in the overarching EPB standard, EN ISO 52000-1:2017, and in supporting documents.

Obsah

ČSN EN 13501-3 This document specifies the procedure for classification of the resistance to fire performance of construction products and building elements used as components of building service installations, using data from fire resistance tests which are within the direct field of application of the relevant test method. Classification on the basis of extended application of test results is also included in the scope of this document. Construction products or building elements for use in ventilation systems include (excluding smoke control system): - fire resisting ventilation ducts; - fire dampers. Construction products or building elements for use in or as cables systems: - unprotected electric cables with intrinsic fire resistance; - fire protective systems for cable systems and associated components. Relevant test methods which have been prepared for these construction products/building elements are listed in Clause 2. NOTE - Cables associated with fire dampers are not generally covered by this document unless there is a local regulation that requires it.

Obsah

ČSN EN ISO 16965 This document specifies a method for the determination of the following elements in aqua regia, nitric acid or mixture of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4)/hydrofluoric (HF) acid digests of soil, treated biowaste, waste, sludge and sediment: aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), caesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rhenium (Re), rhodium (Rh), rubidium (Rb), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr). NOTE 1 - Details on validation are given in Annex A. This method is also applicable for the determination of major, minor and trace elements in aqua regia and nitric acid digests and in eluates of construction products (EN 17200[7]). NOTE 2 - Construction products include e.g. mineral-based products, bituminous products, metals, wood-based products, plastics and rubbers, sealants and adhesives, paints and coatings.

Obsah

ČSN EN ISO 7396-3 Tato mezinárodní norma specifikuje požadavky na směšovací jednotky, tedy na prostředky vytvářející vzduch směšováním kyslíku a dusíku, používané jako zdroj napájení v napájecích systémech medicinálních plynů. Norma je použitelná pro směšovací jednotky, které vytvářejí syntetický medicinální vzduch a vzduch pro pohon chirurgických nástrojů směšováním kyslíku a dusíku v definovaných poměrech a pro směšovací jednotky jako součásti napájecího systému medicinálního plynu pro medicinální vzduch.

Obsah

ČSN ETSI EN 300 440-2 V3.1.1 The present document specifies technical requirements, limits, and test methods for radiodetermination equipment for location tracking applications operating in the frequency range 2,4 GHz to 2,4835 GHz. Further details of the covered equipment can be found in clause 4.2 of the present document. NOTE - The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.3] is given in annex A.

Obsah

ČSN EN 15628 This document specifies qualification of the personnel regarding the tasks to be performed in the context of the maintenance of plant, infrastructure and production systems to fulfil the requirements of the maintenance job. This document describes the knowledge, skills, and competencies required for the qualification of maintenance personnel. These guidelines can be used for training, skills validation of maintenance personal and career plan-ning. This document covers the following professional roles in the maintenance organization: - Maintenance Technician Specialist; - Maintenance Supervisor; - Maintenance Engineer; - Maintenance Manager. These designations can be adapted based on company practices and operational organization. An example of an organizational structure can be seen in Annex A. This document does not specify the verification criteria nor the specialized training of the personnel, which is related to specific sectors. NOTE - Specialization and profession are the subjects of the training carried out in the relevant sector.

Obsah

ČSN EN ISO 22300 This document defines terms related to security and resilience topics.

Obsah

ČSN EN 12953-1 This document is applicable to shell boilers with volumes in excess of 2 l for the generation of steam and/or hot water at a maximum allowable pressure greater than 0,5 bar and with a temperature in excess of 110 °C. For the purpose of this document the following pressurized parts are included: - the shell boiler as one entity of pressure equipment including all the pressure parts from the feedwater/hot water inlet (including the inlet valve) up to and including the steam/hot water outlet (including the outlet valve or, if there is no valve, the first circumferential weld or flange downstream of the shell boiler or if applicable the outlet header); - all superheaters, economizers and interconnecting piping; - additionally, the piping that is connected to the boiler involved in services such as draining, venting, desuperheating, etc., up to the first isolating valve or, if there is no valve, the first circumferential weld or flange downstream of the shell boiler or if applicable the outlet header/piping. This document does not apply to the following types of boilers and equipments: a) water-tube boilers; b) non-stationary boilers, e.g. locomotive boilers; c) thermal oil boilers; d) boilers where the main pressure housing is made of cast material; e) pumps, gaskets, etc; f) brickwork setting and insulation, etc. NOTE 1 - Further information on shell boilers is given in Annex A. NOTE 2 - Stainless steel boilers are covered by EN 14222:2021.

Obsah

ČSN EN 81-82 This document provides rules on how to apply EN 81-20:2020 and EN 81-70:2021+A1:2022 to existing lifts to improve their accessibility and usability for persons including persons with disability. It is detailing the general requirement for accessibility as referred to in EN 81-80:2019, Annex A, Table A.1, No. 1.1. NOTE - EN 81-70:2018 referenced in EN 81-80:2019 has been replaced by EN 81-70:2021+A1:2022. This document applies to permanently installed lifts serving defined landing levels, having a car designed for the transportation of persons or persons and goods. This document does not cover destination control system.