Normy

Obsah

ČSN EN ISO 13144 This document specifies a method for the qualification and quantification of certain quinoline derivatives in textile products by means of extraction with methanol and gas chromatography with mass selective detector or liquid chromatography with mass selective detector. The method is applicable to all kinds of textile products consisting of natural or artificially dyed textile fibres and fabrics. It is further applicable to dyestuff powder used as textile auxiliary for dyeing and printing.

Obsah

ČSN EN 18000-1 This document specifies terms and definitions applicable to the EN 18000 series and requirements concerning information to be provided by applicants submitting animal health in vitro diagnostic reagents to control. This document is applicable to diagnostic reagents, as a priority for infectious (bacterial, viral, fungal or parasitic) or prion diseases and associated animal species for which harmonization of practices in this area is necessary, i.e. those for which the national, regional or international regulatory framework provides for the control of trade in animals and/or animal products and/or the definition of a health status (absence of infection) of areas, establishments or individuals. While all reagents designated by the competent authorities fall under the scope of this document, the authorities or any other animal health stakeholder can choose to derogate in specific and exceptional situations such as emerging, exotic or rare diseases. This document is not applicable to all existing diagnostic reagents, in particular those for which certain parameters described in this document cannot be validly evaluated in accordance with international requirements due, e.g. to the absence of a specific reference method and/or accessible and duly validated reference materials (RMs). This document does not cover the step in which the user verifies a reagent (analysis method adoption).

Obsah

ČSN EN ISO 15614-11 Norma specifikuje požadavky na kvalifikační zkoušky specifikací svařovacích postupů (WPS) pro elektronové nebo laserové svařování. Norma platí pro kovové materiály bez ohledu na tvar dílů, jejich tloušťku, způsob výroby (např. válcování, kování, odlévání, spékání) nebo jejich tepelné zpracování. Zahrnuje jak výrobu nových dílů, tak i opravy. Specifikace a kvalifikace WPS vypracovaných podle předchozích vydání této normy mohou být použity pro jakoukoli aplikaci, pro kterou je určeno aktuální vydání. V takovém případě zůstávají rozsahy kvalifikace podle předchozích vydání nadále platné.

Obsah

ČSN EN IEC 62541-23 This part of IEC 62541 defines ReferenceTypes commonly used in industrial Information Models. They are more specific than the ReferenceTypes in IEC 62541-3 which are an inherent part of the OPC UA Address Space Model.

Obsah

ČSN EN IEC 62541-20 This part of IEC 62541, the IEC standards series dedicated to the OPC Unified Architecture, defines an Information Model. The Information Model describes the basic infrastructure to model file transfers.

Obsah

ČSN EN IEC 62541-17 This part of IEC 62541 provides a definition of AliasNames functionality. AliasNames provide a manner of configuring and exposing an alternate well-defined name for any Node in the system. This is analogous to the way domain names are used as an alias to IP addresses in IP networks. Like a DNS Server, an OPC UA Server that supports AliasNames provides a lookup Method that will translate an AliasName to a NodeId of the related Node on a Server. An aggregating Server can collect these AliasNames from multiple Servers and provide a lookup Method to allow Client applications to discover NodeIds on a system wide basis. An aggregating Server could also define AliasNames for Nodes in other Servers that do not support AliasNames. A GDS can be constructed that would automatically aggregate all AliasNames that are defined on any Server that has registered with the GDS. In this case, the GDS also provides the lookup mechanism for Clients at a well-known endpoint and address.

Obsah

ČSN EN IEC 63541 This document applies to lithium tantalate (LT) and lithium niobate (LN) crystals for surface acoustic wave devices, including the as-grown crystals and lumbered crystals.

Obsah

ČSN EN IEC 60730-2-12 ed. 4 This clause of Part 1 is replaced by the following: This document applies to automatic electrically operated door locks for use in, on, or in association with equipment for household appliance and similar use, including equipment for heating, air-conditioning and similar applications, for equipment that is used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications, that are AC or DC powered controls with a rated voltage not exceeding 690 V AC or 600 V DC, used in, on, or in association with equipment that use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof, utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs, using NTC or PTC thermistors and to discrete thermistors, requirements for which are contained in Annex J, that have electrical circuits and control circuits which are, for example, operated by bimetals, magnet coils, memory metals, pressure elements, temperature-sensitive expansion elements or electronic elements. This document applies to the inherent safety of electrically operated door locks and functional safety of electrically operated door locks and safety related systems, electrically operated door locks where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and performance of the controlled system, the operating values, operating times, and operating sequences where such are associated with equipment safety. This document specifies the requirements for construction, operation and testing of automatic electrical controls used in, on, or in association with an equipment. This document does not apply to electrically operated door locks intended exclusively for industrial process applications unless explicitly mentioned in the relevant part 2 or the equipment standard. However, this document can be applied to evaluate automatic electrical controls intended specifically for industrial applications in cases where no relevant safety standard exists. Take into account the response value of an automatic action of a control, if such a response value is dependent upon the method of mounting the control in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer will apply. Address the integrity of the output signal to the network devices, such as interoperability with other devices unless it has been evaluated as part of the control system.

Obsah

ČSN EN ISO/IEC 19896-2 This document provides the minimum requirements for the knowledge and skills of assessment body testers and validators performing testing activities and validating activities for a conformance scheme using ISO/IEC 19790 and ISO/IEC 24759.

Obsah

ČSN P CEN/TS 18139 This document defines requirements and provides guidance on: - capturing of facial images to be used for verification or identification purposes in applications based on refe-rence images in identity or similar documents and traveller or visa databases; - capturing of fingerprint images to be used for verification or identification purposes in applications based on reference images in identity or similar documents and traveller or visa databases; - data quality maintenance for biometric data captured by/for verification or identification applications; - data authenticity maintenance for biometric data captured by/for verification or identification ap-plications. This document addresses the following aspects which are specific for biometric data capturing: - biometric data quality and interoperability assurance; - data authenticity assurance; - morphing and other presentation attacks and biometric data injection attacks; - accessibility and usability; - recognition algorithms and their evaluation; - privacy and data protection; - optimal process design. The following aspects are out of scope: - other aspects of IT security; - data capturing for ID document enrolment purposes, e.g. passport or ID card enrolment.

Obsah

ČSN P CEN/TS 18214 The eighth edition of ICAO Doc 9303 progresses from using the first edition of the ISO/IEC 19794 series for en-coding biometric reference data in electronic machine-readable travel documents to using the ISO/IEC 39794 series for this purpose. This document specifies how to use ISO/IEC 39794-4 for fingerprint image data stored in electronic machine-readable travel documents.