Filtrace produktů
ČSN EN 16641 Textilní podlahové krytiny - Pokyny pro přípustné barevné odchylky
Obsah
ČSN EN 16641 This document gives guidance in case of complaints when a colour deviation is observed after installation of a textile floor covering by the installer and/or end user. The colour deviation can be observed within different parts of the installation or between the installed textile floor covering and the initially presented sample on which the choice for ordering was made.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN ISO 8504-1 Příprava ocelových podkladů před nanesením nátěrových hmot a obdobných výrobků - Metody přípravy povrchu - Část 1: Obecné zásady
Obsah
ČSN EN ISO 8504-1 Norma popisuje obecné zásady výběru metod přípravy ocelových povrchů před nanášením nátěrových hmot a obdobných výrobků. Obsahuje také informace o jevech, které je nutno vzít v úvahu při výběru a specifikaci určitých metod a stupňů přípravy povrchu.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 12641-1 Intermodálni nákladové jednotky a užitková vozidla - Plachty - Část 1: Minimální požadavky
Obsah
ČSN EN 12641-1 This document specifies minimum requirements for the strength and attachment of tarpaulins used on swap bodies and utility vehicles for road and road/rail combined (intermodal transport) traffic.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 2997-011 Letectví a kosmonautika - Elektrické konektory, kruhové, spojované závitovým kroužkem, odolné proti plameni nebo neodolné proti plameni, pracovní teplota -65 °C až 175 °C trvale, 200 °C trvale, 260 °C krátkodobě - Část 011: Zásuvka bez kontaktů - Norma…
Obsah
ČSN EN 2997-011 This document specifies the characteristics of dummy receptacles in the family of circular electrical connectors coupled by threaded ring. It applies to the class defined in Table 3. For plugs associated with these dummy receptacles, see EN 2997-008.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 4165-022 Letectví a kosmonautika - Elektrické konektory obdélníkové, modulové - Trvalá pracovní teplota 175 °C - Část 022: Nástroj pro montáž a demontáž modulů - Norma výrobku
Obsah
ČSN EN 4165-022 This document defines the insertion/extraction tool for removal of modules used in the family of rectangular electrical connectors.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 2002-21 Letectví a kosmonautika - Kovové materiály - Zkušební metody - Část 21: Radiografické zkoušení odlitků
Obsah
ČSN EN 2002-21 This document specifies the requirements for the radiographic testing of castings for aerospace applications. It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or testing schedule.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 2002-16 Letectví a kosmonautika - Kovové materiály - Zkušební metody - Část 16: Nedestruktivní zkoušení - Kapilární zkouška
Obsah
ČSN EN 2002-16 This document specifies the requirements for penetrant testing of metallic materials for aerospace applications. It is limited to the direction of surface-breaking defects, e.g. cracks, laps, seams and inclusions. It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or inspection schedule.
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 2400 Letectví a kosmonautika - Žáruvzdorná slitina niklu Ni-P96-HT - Tažená za studena a precipitačně žíhaná - Dráty - D <= 10 mm
Obsah
ČSN EN 2400 This document specifies the requirements relating to: Heat resisting nickel base alloy Ni-P96-HT Cold drawn and precipitation treated Wire D
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 3018 Letectví a kosmonautika - Žáruvzdorná slitina Nl-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Přetavená odtavnou elektrodou - Drát tažený za studena na výrobu závitových vložek - D <= 3 mm
Obsah
ČSN EN 3018 This European Standard specifies the requirements relating to: Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) Consumable electrode remelted Cold drawn wire for the manufacture of the thread inserts D
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 3468 Letectví a kosmonautika - Ocel X8CrNiTi18-10 (1.4878/1.4544) - Žíhaná na měkko - 500 MPa <= Rm <= 700 MPa - Výkovky - De <= 100 mm
Obsah
ČSN EN 3468 This document specifies the requirements relating to: Steel X8CrNiTi18-10 (1.4878/1.4544) Softened 500 MPa
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 3481 Letectví a kosmonautika - Ocel X8CrNiTi18-10 (1.4878/1.4544) - Žíhaná - Referenční tepelné zpracování: Žíhaná na měkko - Duté tyče - 5 mm <= a <= 12 mm
Obsah
ČSN EN 3481 This document specifies the requirements relating to: Steel X8CrNiTi18-10 (1.4878/1.4544) Annealed Reference heat treatment: softened Hollow bars 5 mm
Forma
Cena produktu bez DPH 204 Kč
ČSN EN 3482 Letectví a kosmonautika - Ocel X8CrNiTi18-10 (1.4878/1.4544) - Žíhaná - Referenční tepelné zpracování: Žíhaná na měkko - Přířezy pro kování - De <= 100 mm
Obsah
ČSN EN 3482 This document specifies the requirements relating to: Steel X8CrNiTi18-10 (1.4878/1.4544) Annealed Reference heat treatment: softened Forging stock De
Forma
Cena produktu bez DPH 204 Kč