Normy

Obsah

ČSN EN 943-1+A1 Tato evropská norma stanoví minimální požadavky, zkušební metody, značení a informace poskytované výrobcem pro ventilované a neventilované plynotěsné protichemické ochranné oděvy nošené na ochranu proti pevným, kapalným a plynným chemikáliím, včetně kapalných a pevných aerosolů. Ochrana proti částicím je omezena pouze na fyzické pronikání částic. Tato norma nestanoví minimální kritéria k ochraně před nechemickými riziky, například radiologickými, ohněm, tepelnými riziky, rizikem výbuchu, infekčními činiteli. Tento typ OOP není určen ani pro úplné ponoření do kapalin. Základní kritéria na provedení pro komponenty rukavic, obuvi nebo pro ochranu dýchacích orgánů jsou uvedena v jiných evropských normách. Ochrana proti chemikáliím, jako jsou například činidla citlivá na vzduch, nestabilní výbušniny a kryogenní kapaliny, je mimo rámec této normy.

Obsah

ČSN EN ISO 27501 This document is intended to be used within organizations that embrace and intend to implement the principles of human centredness outlined in ISO 27500. This document is intended to provide requirements and recommendations on the human factors and ergonomics approach to achieving a successful and sustainable human-centred organization. It outlines managers' responsibilities ranging from organizational strategy to development of procedures and processes enabling human centredness, and the implementation of those procedures and processes. This document provides requirements and recommendations for managers and the actions to be taken in order for an organization to achieve human centredness. This document can be used: a) by managers to understand and improve human-centred aspects of their activities; b) by managers to identify how their staff can improve human-centred aspects of their activities; c) to provide a basis for training managers how to be human-centred; d) to provide a basis for organizations to evaluate the performance of managers. It is not a management systems standard. Nor is it intended to prevent the development of standards that are more specific or more demanding.

Obsah

ČSN ETSI EN 319 532-3 V1.2.1 The present document specifies the formats for messages that are produced and handled by a Registered Electronic Mail (REM) service according to the concepts and semantic defined in ETSI EN 319 522 parts 1 [7] and 2 [8] and ETSI EN 319 532 parts 1 [10] and 2 [11]. More specifically, the present document: a) Specifies how the general ERDS concepts like user content and metadata are identified and mapped in the standard email structure. b) Specifies how the aforementioned concepts are mapped in the REM service messaging structures. c) Specifies how the ERDS evidence set is plugged inside the REM service messaging structures. d) Specifies additional mechanisms like digital signature and other security controls.

Obsah

ČSN ETSI EN 300 132-2 V2.6.1 The present document contains requirements and measurements methods for the physical interface "A" that is situated between the power supply system(s) and the power consuming ICT equipment. The nominal voltage at power interface "A" of ICT equipment defined in the present document is DC voltage -48 V. The DC power can be supplied by a DC output power system (e.g. based on AC rectifiers on grid or DC/DC converters on solar system, fuel cell, DC engine or fuel cell generator) and also directly supplied by a battery backup in this DC power system. The purpose of the present document is to use a power supply system with the same characteristics for all ICT equipment defined in the area of application: - to facilitate inter working of different types of load units; - to facilitate the standardization of ICT equipment; - to facilitate the installation, operation and maintenance in the same network of ICT equipment and systems from different origins. The present document aims at providing electrical compatibility between the power supply equipment and the power consuming ICT equipment, between different system blocks and loads connected to the same power supply feeding the interface "A" (e.g. control/monitoring, cooling system, etc.). The requirements are defined for: - the power supply input of any type of ICT equipment installed at telecommunication centres that are connected to interface "A" powered by DC; - any type of ICT equipment, installed in access networks and customers' premises, the DC interface "A" of which is also used by equipment requiring a DC supply source; - any type of ICT equipment powered by DC, used in the fixed and mobile networks installed in different locations such as buildings, shelters, street cabinets. Disturbances on the power supply interface "A" relating to the continuous wave phenomena below 20 kHz are covered within the present document. The present document does not cover safety requirements, they are covered by relevant safety standards. The present document does not cover EMC requirements, they are covered by relevant EMC standards. NOTE: Annex B gives guidance on -60 VDC supply systems.

Obsah

ČSN ETSI EN 302 637-2 V1.4.1 The present document provides the specifications of the Cooperative Awareness basic service (CA basic service), which is in support of the BSA road safety application. This includes definition of the syntax and semantics of the Cooperative Awareness Message (CAM) and detailed specifications on the message handling.

Obsah

ČSN EN 1047-2 This part of the document EN 1047 specifies requirements for data rooms and data containers. It includes a method of test for the determination of the ability of data rooms and data containers to protect temperature and humidity sensitive data media (see 3.5) and hardware systems (see 3.6) from the effects of fire. A test method for measuring the resistance to mechanical stress (impact test) provided by data rooms type B and data containers is also specified. Requirements are also specified for test specimens, the technical documentation of the test specimens, materials specimens, physical fittings, the correlation of test specimens with the technical documentation and the preparation for type testing, test procedures as well as the series production. In addition, a scheme to classify data rooms and data containers from the test results is given (see Table 1). As well as providing protection against fire, correctly installed data rooms and data containers offer a defined protection against impacts caused by failure during fire of components and objects external to the data room or data container. Data rooms and data containers having the same design, protection and construction features (type and thickness of construction and protective materials, rebate geometry, lockings, doors, etc.) will only be given the same protection classification as that of the test specimen if the tolerances are within the ranges specified in Clause 7. NOTE: This document does not regulate the use of data rooms in the meaning of the building laws of the respective countries. In the construction of data rooms, it is advised to consider the respective national requirements.

Obsah

ČSN EN ISO 14064-2 This document specifies principles and requirements and provides guidance at the project level for the quantification, monitoring and reporting of activities intended to cause greenhouse gas (GHG) emission reductions or removal enhancements. It includes requirements for planning a GHG project, identifying and selecting GHG sources, sinks and reservoirs (SSRs) relevant to the project and baseline scenario, monitoring, quantifying, documenting and reporting GHG project performance and managing data quality. The ISO 14060 family of standards is GHG programme neutral. If a GHG programme is applicable, the requirements of that GHG programme are additional to the requirements of the ISO 14060 family of standards.

Obsah

ČSN EN 17038-1 This document describes a methodology to evaluate energy efficiency performance of pump units based on a non-dimensional numerical value called Energy Efficiency Index (EEI). This document covers pump units consisting of: - one single or several rotodynamic water pump(s), including where integrated in other products, and driven by a motor system, consisting of an electrical motor, and either: - a terminal box which only enables to operate the pump unit at constant motor stator frequency and thereby (nearly) constant rotational speed, or - a CDM (Complete Drive Module) which enables to operate the pump unit at variable rotational speed depending on a varying demand of flow rate and/or discharge or differential pressure. NOTE: A CDM is also often called VSD (Variable Speed Drive). Pump units as defined above are treated as extended products in respect to their energy efficiency.

Obsah

ČSN EN 16186-4 This document gives design rules and requirements in order to ensure proper access, lighting, seating and exit of the driver's cab. The different dimensions are based on the anthropometric data defined in EN 16186-1. The corresponding assessment methods are also included in this standard. It covers the following aspects: - dimension and interior layout; - door access, steps, floor characteristics; - seats dimension and clearance; - interior cab lighting; - emergency exit; - marking and labelling. This part of the EN 16186 series applies to driver's cabs of Electrical Multiple Unit (EMU), Diesel Multiple Unit (DMU), Railcars, Locomotives and Driving trailers (Driving Coaches). NOTE 1: This European Standard applies to rolling stock in the scope of Directive 2008/57/EC [6]. This part of the EN 16186 series applies to driver's desks installed on the left, on the right, or in a central position in the driver's cab. Due to cab space and resulting desk integration constraints, desk layout can vary. NOTE 2: Due to railway systems constraints, the level of comfort and accessibility provided to the persons outside the anthropometric range defined in EN 16186-1 may vary. Usually the operators manage the potential restrictions, if the driver uses the full range of seat positions (as defined in this standard) combined with extreme body dimensions (as defined in EN 16186-1). This document is not intended to be applicable for OTMs, tramways, metro and light rail vehicles. NOTE 3: For OTMs, see EN 14033-1 [11] and EN 15746-1 [17].

Obsah

ČSN EN IEC 60633 ed. 2 Tato norma definuje termíny pro systémy pro přenos energie stejnosměrným proudem velmi vysokého napětí (HVDC) a pro rozvodny HVDC používající elektronické měniče výkonu pro přeměnu z AC na DC a zpět. Norma je použitelná na rozvodny HVDC s měniči se síťovou komutací, obvykle nejvíce založené na zapojeních trojfázového můstku, u nichž jsou použity jednosměrné elektronické ventily, například polovodičové. Pro tyristorové ventily jsou do této normy zahrnuty jen nejdůležitější definice. Obsáhlejší přehled terminologie ventilů HVDC je uveden v IEC 60700-2.

Obsah

ČSN EN IEC 60793-1-40 ed. 2 Tato norma stanoví jednotné požadavky pro měření útlumu optických vláken a tím pomáhá při kontrole vláken a kabelů pro komerční účely. Pro měření útlumu norma popisuje čtyři metody, které jsou přehledně popsány v jednotlivých normativních přílohách A, B, C a D. Norma dále obsahuje informativní přílohu E, která uvádí příklady výsledků zkoušek krátkého kabelu na mnohovidových vláknech A1.

Obsah

ČSN EN ISO 22117 Tento dokument specifikuje požadavky a dává pokyny pro organizaci programů zkoušení způsobilosti (PT) pro mikrobiologické vyšetřování a) potravin a nápojů; b) krmiv; c) vzorků z prostředí výroby a manipulace potravin a krmiv; d) vzorků z fází prvovýroby. Tento dokument lze použít také pro mikrobiologické vyšetření vody, pokud se voda používá při výrobě potravin, nebo pokud je národními právními předpisy považována za potravinu. Tento dokument se vztahuje na technickou organizaci a provádění PT programů, stejně jako na statistické zpracování výsledků mikrobiologických vyšetření. Tento dokument je určený pro použití spolu s ISO/IEC 17043 a ISO 13528 a zabývá se pouze oblastmi, kde existuje potřeba specifických nebo doplňujících údajů pro PT programy zaměřené na mikrobiologické vyšetřování v oblastech specifikovaných v prvním odstavci.