Normy

Obsah

ČSN ETSI EN 301 545-2 V1.2.1 The present document is a specification of the lower layers and the lower layer signalling system for the two-way satellite network variants defined by [i.16]. The present document constitutes a complete specification of the lower layers for a transparent star satellite network, a transparent mesh overlay satellite network and a regenerative re-multiplexing satellite network. Also, components required for a satellite network with a TRANSEC system are included. The present document is normative for the consumer terminal profile in a transparent star satellite network as defined by [i.16], and does also include normative components specific to the other terminal profiles and satellite network variants defined by [i.16].

Obsah

ČSN EN 62656-1 Tato část IEC 62656 specifikuje logickou strukturu souboru tabulkových procesorů (elektronicky zpracovatelných datových tabulek), použitých jako "datová pole", pro definování, přenos a zaznamenání ontologie (určení a výskytu) produktu. Takové popisy ontologie se v různé literatuře nebo oborech někdy nazývají "referenční slovníky". Logická datová struktura uvedená v této normě se nazývá "ontologický model s datovými poli" nebo zkráceně "POM" (Parcellized Ontology Model. Tento ontologický model zohledňuje modelování nebo modifikování ontologického modelu jako souboru dat o výskytu, což umožňuje vyvíjet ontologický model v průběhu času. Tato část IEC 62656 také obsahuje standardní vztahy mezi metadaty slovníkových datových polí ve formátu tabulkového procesoru, který odpovídá této normě, a metadaty uvedenými v IEC 61360-2 v rámci modelu EXPRESS pro výměnu slovníku.

Obsah

ČSN P CEN/TS 15448 The purpose of this Technical Specification is to define the requirements of the OCR/VCS Standard interface and to convey these requirements in context to the reader. This document is arranged under 4 main clauses as described in Figure 1: - UCM (Use Case Model) describes the use cases for the IC/ED Interface using sequence diagrams with messages. - IDD (Interface Design Description) defines the data model for the IC/ED interface. - SDD (System Design Description) defines the mandatory specification of the IC/ED interface in terms of architecture, services and behavioural models. In the Common Part of this clause no middleware or transport layer is specified. The common part of this clause is intended to be middleware-independent. - SDD-TCP/IP, SDD-CORBA, in these specialized clauses. The specifications for 2 compatible transport solutions TCP/IP, CORBA are provided. Further middleware solutions (such as SOAP) can be added when available, provided that they are fully compatible with the Common Part.

Obsah

ČSN EN 16603-70-31 This Standard defines the monitoring and control data that a supplier delivers together with a product in order to allow a customer to perform space system integration, testing and mission operations. The requirements in this Standard are defined in terms of what data is provided by the supplier to the customer. How this data is provided (e.g. using spreadsheet data or XML) is outside of scope. The Standard assumes that missions conform to the following ECSS standards: - ECSS-E-ST-50 and ECSS-E-ST-70; - ECSS-E-ST-70-41; - ECSS-E-ST-70-32. This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.

Obsah

ČSN EN ISO 472 Tato mezinárodní norma definuje termíny používané v plastikářském průmyslu, včetně termínů a definic, které se vyskytují v normách na plasty (vypracovaných ISO/TC 61), a obecných termínů a definic z polymerní vědy používaných ve všech aspektech technologie plastů.

Obsah

ČSN IEC 60050-192 V této části IEC 60050 je uvedena obecná terminologie používaná v oboru spolehlivosti. Termíny jsou generické a jsou použitelné ve všech oblastech metodiky spolehlivosti včetně elektrotechnických aplikací. Norma není vyčerpávajícím slovníkem pro všechny normy IEC v oboru spolehlivosti: definice některých specializovaných termínů lze nalézt jen v příslušných normách. Tato norma nahrazuje oddíly 191-01 až 191-20 normy ČSN IEC 50(191):1993 a jejích změn Z1:2003 a Z2:2003, které byly podrobeny systematickému hloubkovému přezkoumání a revizi s cílem reflektovat aktuální používání termínů v oboru spolehlivosti včetně terminologie používané v oboru informačních technologií, zavést nové termíny z nových nebo revidovaných norem a jiných odborných zdrojů a poskytovat gramatickou formu a prezentaci, která je v souladu se směrnicemi IEC. Norma má status horizontální normy podle Pokynu IEC 108:2006. Tato terminologie je v souladu s terminologií vypracovanou v jiných specializovaných částech mezinárodního elektrotechnického slovníku.

Obsah

ČSN EN 61174 ed. 3 This International Standard specifies the performance requirements, methods of testing and required test results of equipment conforming to performance standards not inferior to those adopted by the IMO in resolution MSC.232(82). This standard is based upon the performance standards of IMO resolution MSC.232(82), and is also associated with IMO resolution A.694(17) and IEC 60945. Reference is made, where appropriate, to IMO resolution MSC.232(82), and all subclauses whose wording is identical to that in the resolution are printed in italics. In association with the above IMO resolution MSC.232(82), are the International Hydrographic Organization (IHO) publications1. IHO S-32, IHO S-52, IHO S-57, IHO S-61, IHO S-63 and IHO S-64. This standard has included extracts from the above publications where they are applicable to this equipment. Where reference is made, all subclauses whose wording is identical to that in the publications, are printed in italics.

Obsah

ČSN EN 62601 (18 4025) This International Standard specifies the system architecture and the communication protocol of Wireless networks for Industrial Automation - Process Automation (WIA-PA) that is built on IEEE STD 802.15.4-2011.

Obsah

ČSN EN 61400-25-4 ed. 2 The focus of the IEC 61400-25 series is on the communications between wind power plant components such as wind turbines and actors such as SCADA systems. Internal communication within wind power plant components is outside the scope of the IEC 61400-25 series. The IEC 61400-25 series is designed for a communication environment supported by a client-server model. Three areas are defined, that are modelled separately to ensure the scalability of implementations: a) wind power plant information model, b) information exchange model, and c) mapping of these two models to a standard communication profile. The wind power plant information model and the information exchange model, viewed together, constitute an interface between client and server. In this conjunction, the wind power plant information model serves as an interpretation frame for available wind power plant information. The wind power plant information model is used by the server to offer the client a uniform, component-oriented view of the wind power plant data. The information exchange model reflects the whole active functionality of the server. The IEC 61400-25 series enables connectivity between a heterogeneous combination of client and servers from different manufacturers and suppliers. As depicted in Figure 1, the IEC 61400-25 series defines a server with the following aspects: - Information provided by a wind power plant component, for example, 'wind turbine rotor speed' or 'total power production of a certain time interval' is modelled and made available for access. The information modelled in the IEC 61400-25 series is defined in IEC 61400-25-2. - Services to exchange values of the modelled information, defined in IEC 61400-25-3. - Mapping to a communication profile, providing a protocol stack to carry the messages, i.e. the service requests and responses and the values from the modelled information (IEC 61400-25-4). IEC 61400-25-5 defines test cases associated with information, services and protocol stacks for conformance testing of both servers and clients. The IEC 61400-25 series only defines how to model the information, information exchange and mapping to specific communication protocols. The IEC 61400-25 series excludes a definition of how and where to implement the communication interface, the application program interface and implementation recommendations. However, the objective of the IEC 61400-25 series is that the information associated with a single wind power plant component (such as a wind turbine) is accessible through a corresponding logical device. This part of the IEC 61400-25 series specifies the specific mappings to protocol stacks encoding the messages required for the information exchange between a client and a remote server for: - data access and retrieval, - device control, - event reporting and logging, - publisher/subscriber, - self-description of devices (device data dictionary), - data typing and discovery of data types. The mappings specified in this part of IEC 61400-25 comprise: - a mapping to SOAP-based web services, - a mapping to OPC/XML-DA, - a mapping to IEC 61850-8-1 MMS, - a mapping to IEC 60870-5-104, - a mapping to DNP3. All mappings are optional, but at least one optional mapping needs to be selected in order to be compliant with this part of IEC 61400-25.

Obsah

ČSN ETSI EN 300 392-3-3 V1.4.1 The present document defines the Terrestrial Trunked Radio system (TETRA) supporting Voice plus Data (V+D). It specifies: " general design aspects (e.g. reference points, numbering and addressing, or protocol architecture); " the interworking between TETRA networks; " the interworking of TETRA networks with other networks, via gateways; " the supplementary services applicable to the basic TETRA tele- or bearer services. The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following sub-parts: " ISI general design; " Additional Network Feature - ISI Individual Call (ANF-ISIIC); " Additional Network Feature - ISI Group Call (ANF-ISIGC); " Additional Network Feature - ISI Short Data Service (ANF-ISISD); " Additional Network Feature - ISI Mobility Management (ANF-ISIMM); " Speech Format Implementation for Circuit Mode Transmission; " Speech Format Implementation for Packet Mode Transmission. The present document is the ANF-ISIGC sub-part. In analogy with Recommendation ITU T I.130 [i.6], the stage one, stage two and stage three of the three level structure is used to describe the TETRA Inter-System Interface services as provided by European Private or Public Trunked Radio System operators: " Stage 1, is an overall service description, from the service subscriber's and user's standpoint; " Stage 2, identifies the functional capabilities and information flows needed to support the services described in stage 1; and NOTE: The information flows in stage 2 have been drawn as Message Sequence Charts (MSC). Therefore PISN basic call information flows are also shown together with the ANF-ISIGC information flows. " Stage 3, defines the signalling system protocols and switching functions needed to implement the services described in stage 1. The present document details the Interworking Basic Operation of the Terrestrial Trunked Radio system (TETRA). Specifically this sub-part details the stage 1 aspects (overall service description) of the ANF-ISIGC as seen from the TETRA Switching and Maintenance Infrastructure point of view at the Inter-System Interface (ISI). It details the stage 2 aspects (functional partitioning) of ANF-ISIGC which includes the identification of the functional entities and the flows between them, and finally it details the stage 3 signalling protocols for the ANF-ISIGC services, i.e. the protocols at the relevant reference points between the functional entities defined in stage 2. The ANF-ISIGC service specifies: " TETRA Group Call Clear Speech over the ISI, acknowledged and unacknowledged; " TETRA Group Call End-to-End Encrypted Speech over the ISI; " TETRA Group Call Circuit Mode one slot data over the ISI; " TETRA Group Call Circuit Mode one slot End-to-End Encrypted data over the ISI; " TETRA Group Call Circuit Mode N × 2,4 kbit/s, N × 4,8 kbit/s or N × 7,2 kbit/s data, with N = 2, 3 or 4; " TETRA Group Call Circuit Mode N × 2,4 kbit/s N × 4,8 kbit/s or N × 7,2 kbit/s End-to-End Encrypted data, with N = 2, 3 or 4.

Obsah

ČSN EN IEC 62325-451-6 ed. 2 This part of IEC 62325 specifies a UML package for the market information publication business process and its associated document contextual models, assembly models and XML schemas for use within the European-style electricity markets. This part of IEC 62325 is based on the European-style market contextual model (IEC 62325-351). The business process covered by this part of IEC 62325 is described in Clause 5. The relevant aggregate core components (ACCs) defined in IEC 62325-351 have been contextualised into aggregated business information entities (ABIEs) to satisfy the requirements of the European-style market publication business process.

Obsah

ČSN EN 16157-2 Tato druhá část evropské normy řeší popisování poloh ve formátu DATEX II a je potřebná pro veškeré DATEX II aplikace. Norma stanoví prvky komponent, které podporují výměnu a sdílené užití dat a informací v oblasti dopravy. Obsahuje model tříd pro účel popisování poloh a tento model reprezentuje ontologii pro daný účel včetně tabulek s pojmy a jejich definicemi. Užití DATEX II je vyžadováno řadou delegovaných aktů evropské komise a jeho použití je stále širší. Norma je použitelná pro: - dopravní informace týkající se silniční sítě (městské i mimoměstské), - informace veřejné dopravy s přímou vazbou na užití silniční sítě (vlakové nebo trajektové spojení), - dopravní informace pro kooperativní ITS (C-ITS).