Normy

Obsah

ČSN EN ISO 7753 This document provides requirements and guidance regarding the use of CAAS for operations of a nuclear facility. Requirements and guidance on CAAS design are provided in the IEC 60860. This document is applicable to operations with fissile materials outside nuclear reactors but within the boundaries of nuclear establishments. This document applies when a need for CAAS has been established. This document does not include details of administrative steps, which are considered to be activities of a robust management system (ISO 14943 provides details of administrative steps). Details of nuclear accident dosimetry and personnel exposure evaluations are not within the scope of this document. This document is concerned with gamma and neutron radiation rate-sensing systems. Specific detection criteria can also be met with integrating systems; systems detecting either neutron or gamma radiation can also be used. Equivalent considerations then apply.

Obsah

ČSN EN ISO 22188 This document specifies methods and means of monitoring for inadvertent movement and illicit trafficking of radioactive material. It provides guidelines on the use of both stationary and portable, for example hand-held, instruments to monitor for radiation signatures from radioactive material. Emphasis is placed on the operational aspects, i.e., requirements derived for monitoring of traffic and commodities mainly at border-crossing facilities. Although the term border is used repeatedly in this document, it is meant to apply not only to international land borders but also maritime ports, airports, and similar locations where goods or individuals are being checked. This document does not specifically address the issue of detection of radioactive materials at recycling facilities, although it is recognized that transboundary movement of metals for recycling occurs, and that monitoring of scrap metals might be done at the borders of a state. This document is applicable to - regulatory bodies and other competent authorities seeking guidance on implementation of action plans to combat illicit trafficking, - law enforcement agencies, for example border guards, to obtain guidelines on recommended monitoring procedures, - equipment manufacturers in order to understand minimum requirements derived from operational necessities according to this document, and - end-users of radiation detection equipment applicable to this document.

Obsah

ČSN EN 16903 This document specifies product category rules (PCR) for Environmental Product Declarations (EPDs), as described in EN ISO 14025 and EN 15942. This document is applicable to: - functional unit as plastic piping systems buried outside building structure; - declared unit as one or more main structural components, as specified by the list of product standards provided in Annex C. Main structural components are: - pipes; - fittings (e.g. flange couplers, bends and reducers, valves and electrofusion fittings); - manholes, inspection chambers and infiltration boxes. This document gives guidelines for both pressure and non-pressure applications. The intended function of the system considered is to convey fluids according to EN 476 (for sewers, drain and surface water), EN 805 (water supply), or EN 12007 (gas supply). This document provides in Annex D a non-exhaustive list of application fields. In addition, the following applications and materials are not in scope of this document: GRP pipes and fittings, and district heating pipes. This document specifies the rules for the product category of construction products as defined in and is intended to be used in conjunction with EN 15804+A2. In addition to EN 15804+A2, this document specifies: - the functional unit (consisting of pipes, fittings, manholes and inspection chambers and ancillary components) and declared unit (consisting of pipes and/or fittings and/or manholes and /or inspection chambers); - the system boundaries and additional mandatory modules to be declared; - the processes to be included in the installation phase; - scenarios for module A4, A5; - use conditions for the use phase (B modules); - reference service life (RSL); - end of life scenarios.

Obsah

ČSN EN 16904 This document specifies product category rules (PCR) for Environmental Product Declarations (EPDs), as described in EN ISO 14025 and EN 15942. This document is applicable to: - functional unit as plastics piping systems inside the building structure; - declared unit as one or more main structural components which are represented by pipes and fittings, as specified by the list of product standards provided in Annex C. This document gives guidelines for: - both pressure and non-pressure applications; - metal fittings (including manifolds) which are used in a plastic piping system. The intended function of the system considered is to convey liquids according to EN 806 (for potable water supply), EN 1264 (for heating and cooling systems), EN 12828 (for radiators), EN 12056 (for soil and waste discharge and for water traps). This document specifies product category rules of construction products as defined in and is intended to be used in conjunction with EN 15804+A2. This document provides in Annex D a non-exhaustive list of application fields. In addition, the insulated pipes are not in the scope of this document. In addition to EN 15804+A2, this document specifies: - the functional unit (consisting of pipes, fittings and ancillary components) and declared unit (consisting of pipes and/or fittings); - the system boundaries and additional mandatory modules to be declared; - the processes to be included in the installation phase; - scenarios for module A4, A5; - reference service life (RSL); - end of life scenarios.

Obsah

ČSN P CEN/TS 16629 (73 0333) This document describes the detailed technical rules to be followed in the development and maintenance of standards intended to support the assessment of the overall energy performance of a building (EPB) using a holistic approach. This document supports the development and maintenance of a set of EPB standards that provides a systematic, clear, consistent and comprehensive methodology for the benefit of professionals and government entities. The main application is the assessment of the overall energy performance of a building in the context of building regulations, e.g. to specify EP requirements, EP rating and EP certificates. The rules cover general and common aspects on the required quality, accuracy, usability, consistency and interoperability of the EPB standards as a set and individually. For that purpose, this document provides guidance on the process, structure and layout of these EPB standards and accompanying publications, complementary to the CEN and ISO internal regulations. This document is based on the basic principles given in CEN/TS 16628, and is complemented by the overarching EPB standard, EN ISO 52000-1 and supporting documents.

Obsah

ČSN EN 12697-48+A1 This document specifies test methods for determining the bond strength between an asphalt layer and other newly constructed construction layers or existing substrates in road or airfield pavements. The tests can also be applied on laboratory prepared interlayers. The normative tests described in this document are: - Torque Bond Test (TBT), generally applicable to any layer thicknesses; - Shear Bond Test (SBT), generally applicable to layer thicknesses > 15 mm; - Tensile Adhesion Test (TAT), generally applicable to layer thicknesses

Obsah

ČSN CEN/TS 18194 This document describes an assessment procedure for characterizing the effect of different pavement types on road traffic noise emission. The procedure relies on the application of an established measurement method and specifies the detailed conditions for its use to enable the determination of characteristic values for the acoustic performance of road surface types with a given accuracy. Performance is characterized in absolute terms rather than with respect to a reference surface, as specifications for the latter differ from country to country and could contribute to additional uncertainty. The procedure is intended to be suitable for the following applications: - for the acoustic labelling (i.e. the determination of initial acoustic properties) of generic or proprietary road surface products; - for the conformity-of-production (COP) assessment of newly laid surfaces, e.g. to assess compliance with acoustic labels and/or contract specifications, or to assess the homogeneity of the surface over its length; - for the monitoring of the acoustic properties of road surfaces over the course of their working lifetime, so as to help inform surface maintenance/replacement policies and increase understanding of the acoustic durability of road surfaces. The values derived from this procedure are intended to be used for the following purposes: - to characterise the initial acoustic properties of a road surface type (the acoustic label) using a common procedure across Europe. Such an acoustic label can serve as a baseline for setting performance requirements in public procurements, COP assessments and monitoring over the working lifetime of the surface. The label enables the comparison of different road surface types in an unbiased manner; - to verify the acoustic quality and homogeneity of a newly laid road surface; - to determine the acoustic quality and homogeneity of a road surface at a given point during its working lifetime; the collation of sufficient data on the same surface over time enables the prediction of acoustic behaviour and can help to drive surface design/development. In addition, the procedure described within this document also makes possible: - the establishment of reference values for wider road surface types; - the derivation of input parameters for road surface corrections within environmental noise calculation methods (in particular, the harmonised CNOSSOS-EU method).

Obsah

ČSN EN ISO 15192 This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method is applicable to determine Cr(VI) mass fractions in solids more than 0,1 mg/kg. NOTE - In case of reducing or oxidising waste matrix no valid Cr(VI) content can be reported.

Obsah

ČSN P CEN/TS 16931-5 This document describes how trading partners may extend the Core Invoice Model and the related business rules and code lists, to support business cases that are specific to their trading environment, while at the same time maintaining semantic interoperability with the Core Invoice Model. This document does not define a methodology for creation of a Core Invoice Usage Specification, nor does it describe the detailed process of syntax binding.

Obsah

ČSN EN 18074 This document specifies the requirements and recommendations relative to the construction of a sectoral transition plan for industry decarbonization. This document does not specify the requirements for the construction of a roadmap of single industrial company's transition plan (a plant or a group), however, a sectoral transition plan can be used as a reference in an entity transition plan. This document is intended to be used by organizations, including national and public bodies, trade associations, federations, companies and NGOs that wish to establish or monitor sectoral decarbonization plans. This document is climate-programme neutral. If a climate programme is applicable, requirements of this programme are additional to the requirement of this document. In this document, either natural or technological sequestrations occur inside the geographical and sectoral boundaries considered in the sectoral transition plan. Otherwise, they are excluded. In this document, considering its energy consumption and its cost, the direct air capture and storage technology (DACS) is not considered relevant and is excluded from the sectoral transition plan. Carbon offsets are excluded from this document.